How To Exit PS4 Safe Mode?

Last update: 04/10/2024

Safe Mode is a great option when troubleshooting your console or any other device. In some cases, your PlayStation might boot into Safe Mode every time you try to turn it on. Sometimes, this can happen due to a loose cable or a system software update. While it offers excellent troubleshooting options, starting in Safe Mode all the time isn't a viable solution. In this article, we'll show you how to exit Safe Mode on your PS4 , so follow the different methods.

How to get out of safe mode on PS4?

It turns out there are several ways to take your console out of Safe Mode. In most cases, you can do this through the Safe Mode menu. However, when that fails, there are other solutions available that can help you exit Safe Mode. We'll review almost all the different ways you can take your PS4 out of Safe Mode. So, with that said, let's get started without further ado.

Use safe mode menu

The first way you can use to start your PS4 in normal mode is to use the Safe Mode menu. It turns out that there is a Restart PS4 option that can be used to restart your PS4 in normal mode. You just need to make sure that you follow the instructions below so that you can do so without any mishap:

  • First, go ahead and connect your controller from PlayStation to your console.
  • After that, in the Safe Mode menu, choose the option Restart PS4.

Exit PS4 Safe Mode

  • Don't worry, as this will only attempt to restart your console normally and will not reset your console's memory.
  • Wait for the PS4 to restart. In case it restarts in Safe Mode again, continue with the next method provided below.

Completely disconnect PlayStation 4

In case the first method doesn’t work for you and your console keeps booting into Safe Mode, you should try checking your cables, namely the power cables along with the HDMI connections. For a more thorough approach, we recommend that you completely unplug your PS4 and then plug everything back in after a while. To achieve that, just take note of these simple instructions and you’re good to go:

  • To get started, go ahead and turn off your PS4 using the power option. menu or the button Power On to avoid the error message The PlayStation did not shut down properly.
  All about pop-in in video games: causes, solutions, and how to avoid it

  • Once your PlayStation 4 is powered on, go ahead and unplug everything. From the power cord to the HDMI cables, disconnect all the cables.

  • When you do this, leave the console unplugged for unos 20 minutes. In the meantime, check that all cables are working properly. If you have replacements, you should get them.
  • After that, plug all the cables back in and make sure everything goes in properly.
  • Finally, turn your PlayStation back on. In case you see the Safe Mode menu again, choose the option Restart PS4 let's see if that solves your problem.

If your console still boots into Safe Mode, continue with the next method below.

Repair corrupted files

It turns out that another possible cause of your console continuing to boot into Safe Mode could be corrupted files. When this happens, you'll need to repair the corrupted files. Fortunately, this can be done fairly easily through the Safe Mode menu. However, this will take a while, maybe hours, so you'll have to wait.

To help you achieve this, we leave you these simple steps that you must follow:

  • First, turn on your PS4 and go to the menu Safe Mode.
  • Now, in the menu, choose the fifth option, that is, Rebuild database.

  • Once this is done, leave your console alone as this process will take quite a while.
  • After the database has been rebuilt, you can restart your PS4. See if that fixes the problem for you and start it up in normal mode.

Update PlayStation 4

In some cases, the culprit behind your console booting into Safe Mode could be a system software update. As such, you can try updating your PlayStation 4's system software through the Safe Mode menu. This will require an internet connection, so make sure you're fine there. Follow the instructions below:

  • First, make sure your console is connected to the Internet.
  • After that, in the Safe Mode menu, choose the option Update system software.
  How to set up Steam Guard step by step — Quick and complete guide

  • Wait for it to download any available updates and then install them. Check if that resolves the issue.

Restart the PS4

Finally, if none of the above methods fix the problem and you're still stuck in Safe Mode, you'll need to reset your PS4. This means that the system software will be reinstalled on your console, resulting in all of your data and settings being permanently deleted.

As such, this is the last resort option and should be used when nothing else works. All that remains is for you to make sure you follow these instructions to get it right:

  • To get started, get a unit USB and insert it into your computer.
  • Then, on your PC, open the PlayStation 4 website for the system software by clicking here
  • There, scroll down and click on the button PS4 console reinstallation file provided.

  • It is important that you wait for the file to finish downloading.
  • Once the file is downloaded, open the Explorer of files.
  • Navigate to your USB drive and create a new folder called PS4.
  • Inside the PS4 folder, create a folder TO UPDATE.
  • After that, inside the folder TO UPDATE, copy and paste the file you just downloaded.
  • Once this is done, remove your USB and plug it into your PS4.
  • In the Safe Mode menu, choose the option Initialize PS4 (Reinstall System Software).

  • Follow the on-screen instructions to begin the initialization process.
  • After that, wait for it to complete. With that done, your problem should now be gone.

If you've made it this far, I can only thank you for your loyalty and for always visiting our portal in search of quality information. If you know of another effective method, remember that you can share it with us in our comments box below. Hopefully, we'll read each other again in our next post, where we'll share more useful information with you.

Javier Chirinos

Javier Chirinos

My name is Javier Chirinos and I am passionate about technology. Ever since I can remember, I have been interested in computers and video games, and that passion has turned into a job.

I have been publishing about technology and gadgets on the Internet for over 15 years, especially in mundobytes.com

I am also an expert in online communication and marketing, and I have knowledge of WordPress development.