Complete Guide: BAD POOL CALLER Error in Windows 10

The "Bad Pool Caller" error, a blue screen of death error that can crash Windows 10, also restarts your computer to prevent further damage. This error can cause serious problems, and today we'll show you how to fix it.

A bad pool caller can cause problems for your Windows 10 computer. We also cover the following topics:

• How to Block a Bad Pool Caller Many users report that they get a blue screen, followed by a crash. You should not worry about this problem.
• Overclocking is bad Many users increase the speed of their computer to get the best performance. Overclocking can cause other problems, such as this one. This problem can be solved by removing all overclocking settings.
• Bad call to uTorrent pool This error can be caused by third-party applications. Many people have reported that uTorrent was causing this problem, and after removing it, the problem has been fixed.
• Avast Pool Wrong Call. Avast. AVG. Kaspersky. McAfee Antivirus software can also contribute to this problem. Users have reported problems with ESET, Avast, and AVG, as well as Kaspersky.
• Pool caller fails This problem can also be caused by problems with hardwareThe most likely culprit is your RAM. After replacing it, your problem should be solved.
• Bad_pool_caller rdyboost.sys, rdbss.sys, tcpip.sys, tdica.sys, usbport.sys, usbstor.sys, usbhub.sys, iusb3xhc.sys, igdkmd64.sys, picadm.sys The error message can tell you which file is responsible for your computer's crash. Once you have the file name, find the app or device it's connected to and troubleshoot the problem.
• Bad pool unit when inserting memories USB This error has been reported by several users after inserting the USB drive. This can occur if the USB drive you are using is damaged or if your chipset driver has a problem.
• Error of Boot Many people have reported this error on startup. It can crash your computer and cause serious problems. Sometimes, in severe cases, your computer may not even boot up.
• Incorrect error on the quiniela caller page in a non-income area This error is not the same as before, but you can still fix it with these solutions.

How to fix the Bad Pool Caller BSOD error

Table of Contents:

Solution 1: Upgrade to Windows 10

A software or hardware incompatibility can often cause Blue Screens of Death, such as the BAD POOL CALER error. This can lead to all sorts of problems, including BSoD errors.

We recommend downloading the latest Windows 10 updates to ensure your software and hardware are compatible with Windows 10. Microsoft frequently releases Windows 10 updates through Windows Update . Many of these updates fix various software and hardware issues. Be sure to download them to ensure your computer is error-free.

You can manually check for updates by following these steps:

1. Use the Windows Key + I button to open the settings app

2. Once the Settings app is open , go to the Update & Security section.

3. Press the button now . Stay tuned for more updates.

Windows now checks for updates. Windows checks for updates and automatically downloads them if available. If the problem persists after applying the updates, you can check.

Solution 2 – Update your drivers

Incompatible or outdated drivers can cause BSoD errors like BAD POOL CALLER. It is essential that your drivers are kept up to date to avoid these errors.

You can update your drivers by visiting your hardware manufacturer's website and downloading the latest driver for your specific device. This process may take some time as all drivers will need to be updated.

This third-party software (100% safe and verified by us) is highly recommended to automatically download outdated drivers on your computer.

Users have reported that they were able to resolve the BAD POOL CALLER error after updating their Netgear driver. There are also reports that RAID storage controller drivers may be causing the issue.

Update drivers automatically

It can be time-consuming to search for drivers yourself. Manually searching for drivers can be time-consuming. An automatic driver updater saves you the manual search for drivers and keeps your system up to date with the latest drivers.

You can use Tweakbit Driver Upgrader (approved by Microsoft Antivirus and Norton Antivirus) to automatically update your drivers and prevent damage from incorrect versions. This is our favorite automatic driver updater after many tests.

Here's how you can use it.

1. TweakBit Driver Update Tool

2. After installation, Driver Updater automatically scans your computer for outdated drivers. Driver Updater checks your driver versions and suggests appropriate updates. Wait for the scan results.

3. Once the scan is complete, you will receive a list of all the problematic drivers on your computer. You can then review the report and decide whether you want to fix each of them individually or all of them at once. You can update one driver at a time by clicking the “Update Driver” link next to the driver. You can also click the “Update All” button to install all recommended updates.

   Note: You may need to install some drivers in several steps. To ensure all components are installed correctly, you will need to repeatedly click the Update button.

3. Run the BSOD troubleshooter

We will use Windows 10 built-in troubleshooter if driver updates are not working. It can solve many problems like BSOD or BAD POOL CALLER.

This is the procedure to fix BSOD in Windows 10.

1. The request is open. Settings. Go to this section: Update and security.

2. Choose Troubleshooting. You can find it in the menu on the left.

3. Select BSOD. Click on the top panel. The troubleshooter is available.

4. To fix the problem, follow the instructions on the screen.

Solution 4 – Run SFC scanner

Next, we'll run an SFC scan. The System File Checker, a command -line utility that checks all system files, is designed to detect potential problems. An SFC scan can resolve any corrupted system files that are causing the BAD CALLER error.

Here is the procedure to perform a Windows 10 SFC scan

1. Press the Start menu button to open Command Prompt (Administrator).

2. Press Enter to enter the next line sfc / scannow

3. Don't rush the process, it may take time.

4. If the solution is found, it will be applied automatically.

5. Then close the command prompt.

Solution 5 – Run DISM

This tool is recommended for various PC problems

• Fix the most common errors

• protection against file loss

• The consequences of malware

• Repairing corrupted files

• Replace missing files

• Hardware failures

• Performance optimization

Automatic detection and repair of Windows errors

▼ FIX NOW

Very well rated

DISM will be our third troubleshooter. This program redeploys system images and helps resolve potential issues. Running DISM might also resolve the BADPOOL CALLER error.

The standard procedure and use of the installation media is explained below.

1. Right-click to start, then open Command Prompt.

2. Paste this command into your browser and press Enter.

   • • DISM/Online/Image Cleanup/Health Restore

3. You have to wait for the scan to finish.

4. Restart your computer and you can try the update again.

• Windows Installation Support

1. Insert the Windows installation media.

2. Right-click on the Start menu and choose Command Prompt (Admin).

3. After each command, press the Enter key at the prompt.

   • dism /online /clean-image /scan-health
   • dism /online /wipe-image /restore-health

4. Next, enter the following command.

   • DISM /Online /Clean-Image /RestoreHealth /Source:WIM:X:SourcesInstall.wim:1 /LimitAccess

5. Make sure to change the value X Mount the drive letter with the Windows 10 installation.

6. When the procedure is complete, restart your computer.

Solution 6: Check your hard drive

BSOD errors can be caused by file corruption on your hard drive. To fix the problem, you can run chkdsk. You can run a chkdsk scan by following these steps:

1. Please enter Startups with advanced technology. Hold down the power button while restarting your computer (Turn ).

2. Choose Troubleshoot > Advanced options.

3. Choose Command Prompt. You can find the full list here.

4. Type these lines at the prompt. Press Enter at the end of each line to execute it.

   • bootrec.exe / rebuildbcd
   • bootrec.exe / fixmbr
   • bootrec.exe / fixboot

5. User suggestions include running the additional chkdsk command . These commands require you to know the drive letters of all partitions on your hard drive. The following commands must be entered in the Command Prompt. Make sure the letter sequence matches the partitions on your computer's hard drive.

   • Chkdsk /rc

   • c hkdsk /rd :

   This is just an example. Remember, though, that for each hard drive partition you have, you will need to run chkdsk commands.

6. Check if your computer is working again.

Solution 7 – Disable antivirus/firewall

Blue Screen of Death errors can also be caused by antivirus software. You'll need to uninstall your firewall or antivirus software to fix it. Your PC won't be completely defenseless even after removing the antivirus. Windows 10 comes with Windows Defender , which acts as your default antivirus.

User reports indicate they have had issues with McAfee Malwarebytes Trend, ESET, Trend, Comodo Firewall, and ESET.

Almost all antivirus programs may cause this error. Make sure you have removed all other antivirus programs from your system. You will need to completely uninstall some antivirus programs.

Many programs leave files or entries in the registry after being removed. Use a specific tool to completely get rid of some antiviruses. There are many uninstallers available from antivirus companies that you can get for free.

• READ ALSO: Windows error code 0xc000000185

Solution 8 – Uninstall the problematic applications

You need to be careful about installing third-party apps that may cause these errors.

You should uninstall all recently installed applications or restore the original version if you have them installed. Some users have reported that tools like Hotspot Shield can cause these errors.

Solution 9 – Check your modem

Users have been experiencing some issues with Huawei modems . They report that the modem was configured to function as a network adapter, which resulted in the BAD POOL CALLER Blue Screen of Death (BSoD) error.

You will need to configure your modem to work as such via software. This problem can be easily solved by changing the NDIS connection to RAS.

Solution 10 – Check your hardware

According to user reports, these errors are usually caused by hardware failures. Check your hardware if you receive a BAD COP CALLING error. This problem can be resolved by replacing the faulty hardware. Most users have reported that the motherboard or RAM was to blame.

It's easy to test your RAM. To do this, simply test each RAM module until you reach the problematic one. You can use MemTest86+ for a complete RAM analysis.

This error can be caused by almost any hardware component. If you have recently installed new hardware, be sure to remove or replace it as it may not be compatible with your computer.

You can fix this problem by updating your drivers or uninstalling the problematic software.

Editor's Note: This document was originally published in June 2016. It has since been fully updated to be more accurate, current, and comprehensive.

READ ALSO:

• Solution: IRQL_GT_ZERO_AT_SYSTEM_SERVICE Error on Windows 10

• Fix Windows 10 Exception Access Violation Error

• This error occurred during Windows 10 update

• Fix: ACPI_BIOS_ERROR Error on Windows 10

• Fixed: System32.exe error on Windows 10