Windows 10 stuck on rolling back: Complete solution

Windows Windows 10 is free to upgrade. Microsoft gives you the option to go back to the previous version of Windows, if Windows 10 does not meet your expectations. Unfortunately, some users report that Windows 10 does not allow downgrades and Windows 10 users are unable to go back to Windows 10.

How to fix Windows 10 rollback issue?

This can make it difficult to revert to the original version of Windows.

• Windows rollback cycle after an update Users are reporting that you may sometimes get stuck in rollback mode after an update. Try one of these solutions to resolve the issue.
• Windows 10 Rollback always on for reboot Sometimes your rollback may get stuck on reboot. It is best to shut down your computer and let the rollback process finish.
• You can exit and enter the Windows rollback loop. This will help you resolve the problem. Sometimes this will solve the problems and prevent future crashes.
• It is not possible to downgrade Windows 10 Sometimes your computer may crash during an update. You may not be able to resolve this issue using the start Legacy.
• Boot loop stuck in Windows 10 Windows 10 rollback, black screen This problem can be solved by using the Symbol of the system.
• Windows 10 Rollback is not possible If your rollback doesn't work, you can perform an in-place upgrade. This will update Windows to the latest version, which should fix the problem.

Solution 1 – Force a restart/shutdown

Some people have reported that they are unable to roll back from Windows 10 and are stuck on a loading screen. This can become a problem when Windows 10 stops working properly or you have to restore the old version. This problem can be solved with a simple restart.

Users report that the rollback process freezes and the hard drive indicator does not blink. The indicator should blink again after reboot, and then the rollback process will resume without any problems.

Solution 2 – Use legacy boot

UEFI mode has caused several users to report that their rollback is interrupted. Users have reported that the problem occurs when booting from flash drives and DVDs. This can cause the rollback to stop. You can resolve the issue by going into the BIOS and changing the boot mode from Legacy to UEFI. To do this, follow these steps:

1. Hold while your computer boots up F2 You can also visit our website From Enter the BIOS by pressing the key on your keyboard. You may have to do this several times until you find the correct key.

2. After entering the BIOS, you will have to start looking for it Start mode To change the UEFI value, Legacy You can find the option in your motherboard manual.

3. Restore the changes and rollback again.

Solution 3: Use a hard disk image to restore the system

You've probably created a backup of your hard drive if you know the image of it. You can also avoid creating a backup of your hard drive if you don't use backup software.

You can back up your computer using the hard drive image if you created the image before upgrading to Windows 10. You must have created the image of your hard drive before upgrading to Windows 10.

Solution 4 – Leave the computer on for several hours

Rollbacks can sometimes take several hours. Users report that they complete within a few hours, if you are patient. Some users report that the rollback may, in some cases, experience a reboot loop. However, if this occurs, some users suggest leaving the computer alone for several hours to resolve the issue.

Solution 5 – Use the command prompt

Users say that if you find your computer stuck in the rollback process, it is possible to fix it using Command Prompt.

Since Windows does not allow you to boot into Windows, you need to run Command Prompt without Windows. Here are the steps to follow:

1. If your computer continues to boot, restart it several times.

2. A list of options will appear for you. Now you can choose between several options Troubleshooting > Advanced Options > Command Prompt .

3. Run after start of line commands chkdsk c: / f .

4. The scan will now begin. It will check your hard drive for errors. This may take some time, so be patient.

Once the scan is complete, you can access Windows 10 again. You may need to perform other commands if the problem persists. Follow these steps to learn how to do it:

1. Continue with the steps above for an opening Command prompt .

2. The following commands can be executed once you open the command prompt:

• bootrec / fixmbr
• bootrec / fixboot
• bootrec / RebuildBcd
• bcdboot C:\windows\sc

Check if you still have the problem after running the commands.

Solution 6 – Perform an in-place upgrade

If you don't know what an in-place upgrade is, it will cause Windows 10 to install the latest version of Windows 10 while keeping your files unchanged. Here are the requirements for an in-place upgrade:

• A memory USB empty (minimum 8GB)
• A second computer that works

You must first download the file to fix the problem Create media Run it on another computer. Follow these steps:

1. Connect the USB flash drive directly to another Windows PC.

2. Choose Another option is to create an ISO or USB flash drive to install the software. Click here to download Next To continue

3. Make sure you select the correct version for your computer, and then click Next .

4. Please select USB key Click here Next .

5. Click on the link to choose your USB flash drive Next To continue

Wait for the media creation tool to create a bootable device. You can now return to your PC after creating a bootable USB device. The USB device can be connected to your PC. Follow the steps below:

1. You will be asked to choose between several versions of Windows when your computer starts up. Choose the version that suits you and your computer will enter safe mode.

2. Once your computer has booted, you can press Ctrl + Shift + Esc How to start The Task Manager .

3. Take a look at The Task Manager Choose File > Run a new task .

4. CONTACT US explorer.exe Click here OK .

5. Now open your flash player and open the file setup.exe .

This will start the setup process. You can update your computer or keep your files safe by following these instructions:

1. Let the setup prepare the necessary files.

2. Please select Install updates and download them (recommended). . You don't need to do this. However, you can download updates later if needed. You can click here Next To continue

3. Follow the instructions until you reach the screen Are you ready for installation? . Choose Save more! .

4. Choose wisely Keep your personal data and programs safe . Click on Next To continue

5. For complete setup, follow the on-screen instructions.

Once the installation is complete, the latest version of Windows should be installed. Everything should be the same as before.

If you choose the Choose the savings you want If this happens, the ISO file may not be available. This means that the ISO file does not match your version of Windows. Download another ISO file or continue deleting all files on the system drive.

Solution 7 – Reinstall Windows

Sometimes you need to completely reinstall Windows. For this, you will need Windows installation media. It is important to note that Windows reinstalls all files on the C drive. Therefore, we advise you to back them up. It is possible to access Windows 10 from another location in case of problems. You can also start Windows 10 with a Live CD Linux. This way, Linux can locate and back up the files.

Follow these steps to reinstall Windows 10.

1. The Windows 10 installation device must be connected to your computer. You can then boot from the device.

2. Choose the correct option Buy it now .

3. Just enter your product key, and then click Next You can also activate Windows 10 later if you don't have the product key.

4. Click the version of Windows you want to install Next .

5. Select the unit you want to use and press “Apply” Next The system partition may not be marked in all cases.

6. Once the installation is complete, you will be asked to confirm. You will need to follow the on-screen instructions to complete the process.

Once the installation is complete, you should find the cause of the problem. Move the files to your backup, and you're done. This is not a permanent solution.

Sometimes the rollback process may get stuck. If this happens, you can try the following solutions.

Not from the editor The original July 2016 publication of this post has been completely rewritten and updated to reflect the latest clarifications, additions, and freshness.

Windows 10: How to use the tool Windows Update to clean windows 10

How to upgrade from Office 2013 to Office 2016?

Fixed: Windows 10 Mobile cannot be restored to Windows Phone 8.1

Fix: This setup did not use an existing partition