WHEA Unrecoverable Error [Complete Guide to Fix It]

Last update: 04/10/2024
  • This error is usually caused by problems with hardwareIt may be possible to fix this by frequently updating the software.
  • There are many articles we have written about Whea errors. All of them contain suggestions for fixing them.
  • Hardware errors of Windows 10 can cause important error messages, as you can see.
  • Blue screen errors are quite common and can cause serious damage. Our library has articles that will help you in most cases.

This is the message of Your Uncorrectable error appears There are two things that can cause a blue screen in Windows 10:

There are two possibilities: either your hardware is failing, or your Windows 10 drivers are having problems.

You will not be allowed to use your laptop or desktop computer until the issue is resolved.

The error message will be displayed in the most extreme case We have an unrecoverable error There is more Appearance Various hardware issues can cause the Windows 10 screen to turn blue.

Among them are:

  • Hard drive not responding
  • Your RAM is not responding
  • It is not working properly on your motherboard

An example of a problem is that some drivers stop working after upgrading your computer to Windows 10. We will show you how to confirm this with the following tutorial.

Uncorrectable error variations

An uncorrectable Whea error can have serious consequences. Many users have also reported such errors.

  • Unrecoverable sysprep error in Windows 10
    • This error can sometimes occur when using sysprep, according to some users.
    • But with our help, you can fix it.
  • Whea unrecoverable overclock error
    • Many users have claimed that the error started occurring after overclocking.
    • Try changing or removing the overclock settings to fix the problem.
  • Unrecoverable error hal.dll, ntoskrnl exe
    • Some files may cause this error in some cases.
    • According to many users, this error may be caused by hal.dll or ntoskrnl.exe.
  • Overheat error is not correctable
    • This error can sometimes be caused by overheating.
    • Try cleaning your computer or checking if the fan is working properly.
  • Uncorrectable Whea error start
    • Many users reported that the error message appeared as soon as the computer started.
    • You will need to try one of the solutions we offer in safe mode.
  • This update fixes an uncorrectable bug in the BIOS
    • This problem can sometimes be caused by a BIOS update.
    • You may need to roll back to a previous BIOS version to resolve this issue.
  How to fix error 0xc0000906 in Windows step by step

How can I fix Whea unfixable errors?

1. In BIOS, disable Overclock

  1. you can open the Start Menu Ir a Configuration .
  2. Visit Improvement and security Then go to the Recovery .
  3. Please click on Start now En Tech-savvy startups Your computer will restart.
  4. El Boot Advanced is available in Solve your problems Read more Options for advanced features And later UEFI firmware configuration .
  5. Please click on Reboot.
  6. The BIOS should open automatically after you restart your computer. Click the tab to access it. Move along .
  7. Naviateto Performance, Research Overclocking.
  8. Make sure to disable overclocking
  9. You can save the BIOS changes by pressing the F10 key on the keyboard, and then boot the computer normally.

This error can be fixed by disabling overclocking in your BIOS. Please note that overclocking your computer may cause overheating or a blue screen of death.

Overclocking software is one way to enable this. uncorrectable Whea errors This problem can be resolved by disabling or uninstalling any existing overclocking programs on your system.

Disabling overclocking should resolve this issue. If it persists, check out one of these solutions.

2. Windows will start in safe mode and the drivers will be checked

  1. Start or shut down your Windows 10 computer.
  2. Press the “Enter” button when your computer is ready. F8 Use the keyboard to enter another combination Shift + FF8 .
  3. El Recovery mode This should be the first one.
  4. Choose Puedes estar seguro Following the instructions on the screen.
  5. When the computer starts up Secure Modems The mouse should move to the right of the screen
  6. On the Start menu, click the search box.
  7. In the search box, type Device administrator .
  8. After opening Device administrator Every driver must be updated.
    • This will allow us to determine if one of the drivers is the cause.
  9. Once the drivers have been updated, it is time to boot the computer.
  10. Try again to find the exact same error message.
  Have you lost your laptop charger? Here's what to do

We recommend that you avoid updating your drivers manually. This can cause permanent damage to your computer by downloading the wrong versions of the drivers. Use TweakBit Driver Update Tool It is 100% safe, and we have tested it.

The tool has been approved by Microsoft and was deemed by our team to be the most effective automated solution after extensive testing.

Disclaimer You may not be able to use all the functions.

Our handy guide will help you update your driver like a pro.

3. Check for hardware problems

  1. Sign up in Safe Mode As explained in the previous tutorial.
  2. Tap on the home screen and enter chkdsk .
  3. Please click (left click on) chkdsk .
  4. Allows the execution of chkdsk.
    • Your hard drive may be malfunctioning if it suddenly stops and gives errors.

Our guide will help you be efficient and reduce the number of minutes in CHKDSK.

4. Windows Memory Diagnostic

  1. Use the press Home
  2. In the search field, type Windows Memory Diagnostic .
  3. Please click (left click on) Windows Memory Diagnostic .
  4. Let us Windows Memory Diagnostic
  5. If it doesn't stop, like on the hard drive, check for errors.

This guide will teach you everything about Windows memory diagnostics.

5. Reinstall a Windows update that doesn't work

  1. Click on the windows key + To open the Application settings .
  2. Then go to the Security updates and improvements .
  3. Please click on Keep control of your history .
  4. Click here Uninstall all updates .
  5. You will see a list of recent updates.
  6. To remove a specific update, double-click it.

BCD stands for Boot Configuration Data. The problem is usually caused by a missing BCD, or a corrupted BCD. Windows does not start properly and instead displays the recovery screen.

  How to clone a virtual machine in Hyper-V step by step and in detail

Leave a comment