Fix: “Missing Multimedia Driver” During Wn 10 Installation

Over time, the installation of Windows has become a trivial matter: does anyone remember Windows XP and the long installation process followed by a demoralizing search for drivers?

Fortunately, those days are long gone. Although installing Windows 10 is easy, errors still occur, such as the message «A media driver is missing»…. «This message prevents the user from going to the «Install Now» screen.

The installer of USB It starts up correctly, but the installation fails due to a missing USB hub driver.

Today we have given some solutions to help you solve this problem. Please feel free to read them below.

You can also read: How to Fix USB Device Not Recognized Error

Fix: “Missing multimedia driver” during Wn 10 installation

1. Make sure you meet the Windows 10 requirements.

Start with the most important thing. Before continuing, we recommend check the system requirements for Windows 10. In addition to applying them to your standard system, we also recommend updating your BIOS (if updates are available) before proceeding with a new installation of Windows 10.

These are the minimum system requirements to run Windows 10:

• Processor: 1 gigahertz (GHz) or faster processor or SoC chip.
• RAM: 1 gigabyte (GB) for the 32-bit version or 2 GB for the 64-bit version.
• Hard disk space: 16 GB for 32-bit operating system 20 GB for 64-bit operating system
• Graphic card: DirectX 9 or higher with WDDM 1.0 driver
• Display: 800 × 600

For optimal workflow, it is obviously better to have at least 2GB of RAM (3 for the 64-bit version) and much more processing power.

2. Try changing the USB hub during installation.

This is not a new problem. It has been occurring for a long time. Many users have encountered this problem during a clean installation of Windows 7 and 8. Currently, one user seems to have found a solution to the Windows 7 installation problem, which will hopefully be applicable to Windows 8 or, for that matter, Windows 10 as well.

In fact, he managed to avoid the error screen with the original solution. Here's how you can do it yourself:

• Create an installation USB disk to Media Creation Tool o Rufus.
• Load the disc and wait for the installation files to load.
• Select the settings and Click Install Now.
• If an error occurs, click Cancel, disconnect the USB cable and connect it to another USB port.
• Click Install Now again and everything should be fine.

This should work, but keep in mind that this is primarily for users who have already installed Windows 10 on a particular computer.

3. Try another USB flash drive and use only the USB 2.0 port.

For some reason, not all compatible USB flash drives (6GB memory) can download the installation files. If you have a different USB flash drive, you can try to recreate the setup and reinstall Windows 10. To do this, You can use a Media Creation Tool or third-party software.

If you have never installed Windows 10 on your computer, the BIOS will probably not load the installer if you use a USB 3.0 port, so Make sure you only use USB 2.0 ports when installing Windows 10. You can easily identify the USB 3.0 port by the blue stripe inside it.

4: Set the USB option to Auto and disable USB legacy if applicable.

Disabling some options in the BIOS has helped some users avoid this error. If you are installing a 64-bit version of Windows 10, we recommend that you first disable the Legacy USB and Legacy BIOS options in the BIOS (UEFI) settings. Also Make sure to enable AHCI before connecting the installation flash drive.

Some modern configurations allow the user to enable “USB 3.0 only”. It is recommended to set this option to Auto. If you have this option in your BIOS/UEFI menu, it goes without saying.

5. Try using Rufus instead of Media or DVD Authoring.

If this doesn't work for you, you can start over with Rufus. While the creation tool provided by Microsoft usually works well, we recommend trying an alternative. And if you've exhausted all options for installing Windows 10 from a USB drive, try using a DVD.

You can download an ISO file and burn it to a DVD using Windows Tools. The main requirement is that you have a DVD-ROM. Another acceptable solution is to upgrade from Windows 7/8.1 to Windows 10 using the System Media Creator tool and then a clean reinstallation. That should do the trick. If you have any solutions or queries regarding the solutions mentioned above, let us know in the comments.

You can also read: Solution: “Display Driver Failed to Initialize Error in W10”