KERNEL MODE_TRAP Error on Windows 10: Completely Fixed

Users may be Windows 10 users have made the switch to Windows 10 several times, but that doesn’t necessarily mean there aren’t any issues. The UNEXPECTED KERNEL MODE TRAP error in Windows 10 is an issue that many users have encountered.

The UNEXPECTED NUMBER MODE TROPHY error is caused by driver incompatibility or a failure of hardwareIf these issues did not occur in previous versions of Windows, your driver is likely incompatible.

Sometimes the error can be caused by a build-up of dust on your connectors. In these cases, you need to clean off all the dirt and debris before reconnecting them.

You should call an expert if your computer's warranty has expired or if you don't know how to fix it. This problem may have started after the release of Windows 10.

KERNELO TROPADO MODEL UNEXPECTED is an irritating error. Users also report the following issues:

• Unexpected kernel mode trap win32kfull.sys.sys.sys.sys.sys., usbxhci.sys.sys, nvlddmkm.sys.sys.sys.sys.sys.sys.sys.sys.sys.sys.sys.sys .sys.sys.sys.sys.sys. The file name is often followed by this error. The most likely cause is a specific driver or third-party software.
• Unexpected Kernel Trap Mode Overclocking You may see this error when overclocking your computer. It is best to remove all overclocking settings.
• ESET Smart security, AVG and McAfee kernel unexpected trap mode Users claim that this issue may be caused by their security software. McAfee and Avast users have frequently reported this problem.
• Kernel Trap Mode: Unexpected RAM This problem can also be caused by hardware issues. In most cases, the most common cause of this error is the RAM memory.
• Unexpected kernel mode trap after Windows update Users have reported this issue in several cases after installing Windows updates. This issue can be resolved by uninstalling the corrupted update.
• Kernel in cheat mode Virtualbox unexpected This problem can occur when running virtualization software. Virtualbox users and VMWare have reported the same problem.
• Unexpected Core Moderation Trap BSOD Blue screen of death and reboot are the usual consequences. This annoying problem is not something you need to worry about. Our solutions will help you.

Windows 10: Unexpected error with STORAGE mode

Table of contents

Solution 1 – Remove the driver that is causing the problems

While this issue can be caused by any driver, some people claim to have uninstalled both Bluetooth and wireless drivers. While the issue doesn't have to be solely related to Bluetooth or wireless drivers, be warned that they are often the cause of this problem.

1. CONTACT US Tech-savvy startups . The easiest way to do this is to go to the Start menu, click the Restart button and hold down Shift You can use the keyboard to access Windows 10. However, if Windows 10 cannot be accessed, you will be able to see the advanced options of Boot after several reboots.

2. Choose from advanced startup options Troubleshooting > Advanced options > Startup settings .

3. El safe mode should be an option.

4. Enter your details Puedes estar seguro go to Device administrator .

5. Take a look at Device administrator Right-click the driver that is causing the problem and select “Remove from this list” uninstall .

Update drivers automatically

Finding drivers can be tedious and time-consuming. We recommend that you use an automatic driver updater to save time and effort. Automatic driver updates will make it easier for you to find the right drivers, save time, and ensure that your computer is always up to date.

Certified by Microsoft and Norton Antivirus, Tweakbit Driver Updater will automatically install the correct driver version and protect your computer from potential damage. This is our favorite automated driver updater after extensive testing.

Here's how you can use it.

1. TweakBit Driver Update Tool

2. The program automatically starts searching for outdated drivers after installation. Driver Updater automatically scans your computer for outdated drivers. It compares current versions with its cloud database and recommends necessary updates. All you have to do is wait for the scan results to complete.

3. Once the scan is complete, you will receive a list of all problematic drivers on your computer. Check the results and choose whether you want to update each driver individually or in one step. You can update one driver at a time by clicking the “Update Driver” link next to the driver. You can also click the “Update All” button to install all recommended updates.

   Nota: You may need to install some drivers in multiple steps. To ensure that all components are installed correctly, you will need to press the Update button repeatedly.

Solution 2 – Run the BSOD troubleshooter

Next, we are going to try the built-in troubleshooter in Windows 10. It can help resolve BSOD and other system issues. It could be used to resolve the INSPECTED mode error trap issue.

This is the Windows 10 troubleshooting tool.

1. The application is open Adjustment of Go to this section Update and security .

2. Choose Problem solving You can find it in the menu on the left.

3. Choose BSOD Click on the top panel Troubleshooter is available

4. To troubleshoot, follow the instructions.

Solution 3 – Run SFC scanner

We will also try the SFC scanner. This command-line utility commands Scan your system and repair broken files. To resolve BSOD errors such as UNEXPECTEDKERNELMODE TRAP error, you can repair the broken files. corrupt files of your system. It is worth using the SFC scanner.

Here is the procedure to use the SFC scanner in Windows 10:

1. Right click on the Start menu button, and it will open Symbol of the system (administrator).

2. Click Enter on the line below sfc / scannow

3. Don't rush the process, it may take time.

4. If the solution is found, it is applied immediately.

5. Then close the command prompt.

Solution 4 – Run DISM

Deployment Image Servicing and Management (DISM) tool is used to redeploy the system image. You can use this tool to resolve many issues including BSOD issues.

Next, we will discuss the procedure for standard support and installation support.

1. Right-click to start, then open Command Prompt.

2. Paste the command below and press Enter.

   • • DISM Online/Image Cleanup/Health Restore

3. You have to wait for the scan to finish.

4. Restart your computer and then try the update.

• Windows Installation Support

1. Insert the Windows installation media.

2. Right-click on the Start menu and choose Command Prompt (Admin).

3. Type the following commands in the command prompt and press Enter to confirm.

   • dism /online /clean-image /scan-health
   • dism /online /wipe-image /restore-health

4. Type the following command and press Enter.

   • DISM /Online /Clean-Image /RestoreHealth /Source:WIM:X:SourcesInstall.wim:1 /LimitAccess

5. Make sure to change the value X Mount the drive letter with Windows 10 installation.

6. When the procedure is complete, restart your computer.

Solution 5: Disable uninstallation

Users claim that third-party antivirus software may be causing the problem. Your Windows installation may be affected by your antivirus and firewall. You need to disable this antivirus software to fix the problem.

You may need to remove your firewall or antivirus software if this does not solve the problem. Download a specific tool to completely uninstall your antivirus from the manufacturer's website. Check if you have successfully removed the virus.

This tool is recommended for many PC problems

• Fix the most common errors

• protection against file loss

• The consequences of malware

• Repairing corrupted documents

• Replace missing files

• Hardware failures

• Performance optimization

Automatic detection and repair of Windows errors

▼ FIX NOW

Very well rated

You can reinstall your antivirus to fix the problem or change your antivirus software. Windows Defender is also an option. Avast has caused problems for many users, but it is possible to use Windows Defender instead.

Solution 6: Install the latest updates

You may be able to fix an unexpected error on your computer by updating the software. You can do this by doing the following:

1. The application is open Configuration . This can be done quickly using the keyboard shortcut Windows key + I .

2. Open Settings app Navigate to section Update and security .

3. Press now Stay tuned for more updates button.

Windows will now check for updates. Windows will now check for updates and download them automatically in the background. Many users have reported that their issues have been resolved after updating Windows. Be sure to try it out.

Solution 7: Use the chkdsk command

Users suggest that you run a chkdsk command to check for an INEXPECTED KEY MODE TRAP error on your computer. The error can be caused by corrupted files. However, you should be able to fix it with the following:

1. Open Command prompt You can also be an administrator. To do so, press the following button Windows key + X Click Win + X to access the Win + X menu Administrator command message . One Command prompt If this is not possible, use PowerShell for the administrator rather.

2. Open Command prompt Enter chkdsk /rc : Use the press CONTACT US To execute it.

3. The next time your computer restarts, you will be prompted to configure disk verification. Go to Y Use the press CONTACT US .

4. Restart your computer and the chkdsk scan will be performed automatically.

To access Windows if this error occurs, you can also use the Advanced Boot option to launch the Command Prompt and run the chkdsk scan. To fix the problem, you may need to scan all other drives on your computer besides C.

Solution 8 – Disable your graphics card driver

Users are reporting that their graphics card driver may be causing an unexpected error in HEAD TRAP MODEL. Users have reported the issue using the latest drivers. NvidiaAccording to users, it is possible to revert to previous drivers.

You can do it simply by deleting The Nvidia driver You can access the Device Manager. We have a tutorial on how to uninstall all files associated with your graphics card.

Windows will then install the default driver after you remove the driver. You can now check if the problem still exists with the default drivers. Sometimes Windows 10 can automatically update drivers in the background. This causes the problem to reappear. It is possible to prevent Windows from automatically updating certain drivers.

Solution 9 – Check that the cables are properly connected

Some users claimed that the KERNELO MODE TOO LONG was due to their hardware. They claimed that their connectors did not fit properly, but they were able to resolve the issue by connecting the proper cables.

Check that the RAM is installed in the correct location. Users have not reported any issues with the RAM, so be sure to check.

Solution 10 – Check your RAM

Blue screen problems are often caused by faulty RAM. You can check your RAM for signs of problems. It's easy to test your RAM by removing a single module from your computer. If the problem persists, you can remove the entire module. Repeat this process until all modules have been tested.

However, to test RAM, you will need to use Memtest86+. You have to test each module separately. For a detailed analysis, you will need to run the test for about an hour per module.

Solution 11 – Reset Windows 10

You may need to restart your computer if the problem persists. The process will erase all files on your system drive. Make sure you have a backup. You may also need Windows 10 media for this task. You will need the Media Creation Tool.

You have to follow these steps to perform the restoration:

1. Starts Early departure Here is a quick guide on how to do it Solution 1. For more information, see the manual.

2. Choose Troubleshooting > Reset PC > Erase everything .

3. To proceed to the next step, you may be prompted to insert the installation media. Make sure it is ready.

4. Select the version you want to use, then choose “Windows” Only on the disk where Windows was installed > I can only delete my files .

5. The list of possible changes will appear after the restart. Click the button to start reset .

6. For a hard reset, follow the instructions on your screen.

You can reinstall Windows 10 after the reset. This should solve your problem.

These drivers can be removed from your operating system to avoid any issues when you upgrade to Windows 10. This article should have helped you understand the situation. If you have any questions or comments, please leave them in the comments section.

Not from the editor The original November 2015 publication of this post has been completely rewritten and updated to reflect the latest accuracy, completeness and freshness.

Fix: Blue Screen after Windows 10 Rollback

Windows 10 Blue Screen Loop [Fix]

Fix: Wdf_violation Windows 10 BSoD Error

Surface users can fix [FIX]BSOD when installing updated firmware