Ipv6 No Internet Access On Windows 10. Solutions

The problem “IPv6 connectivity without Internet access” occurs more frequently than you think. However, don’t worry, here we will show you how to solve this problem.

If you see “No network access” under IPv6 Connectivity, it means that the DHCP server was not detected and the link-local address was not assigned. This is not a problem and there is nothing to worry about.

However, if the message says “No Internet Access” it means that a DHCP server was detected, but no link-local address was assigned, which means there is something wrong with your IPv6 configuration.

We hope you are clear that “No network access” and “No Internet access” are two completely different things. But without further ado, let’s see what this code is about and how to resolve the issue.

Maybe you may be interested: Fix Error "Windows Could Not Complete The Format"

What is IPv6?

Internet Protocol version 6 (IPv6) handles the entire communications protocol, allowing data communications over a packet-switched network. IPv6 was developed by the Internet Engineering Task Force (IETF) to overcome the problems of IPv4 address exhaustion.

What causes IPv6 to not access the Internet on Windows 10?

IPv6 is not supported by many devices and is not enabled by default. But there may be other reasons such as corrupted, outdated or incompatible network drivers, corrupted IP settings and the firewall may be blocking the connection, virus infection or malware, among others.

As you may have noticed, there are various reasons why you may face the “IPv6 Connectivity No Internet Access” issue as different users have different system setup and environment, so if something works for one user it doesn’t necessarily mean it will work for you. Therefore, you should try as many methods as possible.

How to fix IPv6 error no internet access in Windows 10

We recommend that you create a restore point, just in case something goes wrong during the procedure. It is the best option, for safety, especially if you are not a very experienced user. So let's see how to get out of this problem:

Method 1: Reset IPv6 and Winsock

This is the procedure you should follow in this case:

Step 1: go to symbol of the systemTo do this, search for 'cmd' and then press Enter.

Step 2: Write one by one the commands, one by one. Press Enter after placing each one:

Step 3: reboot for the changes to be applied. The Netsh Winsock command Reset fix IPv6 connectivity without internet access.

Method 2: Update network drivers

Go to the manufacturer's website, either the manufacturer of your laptop (e.g. Dell, Acer, etc.) or the manufacturer of your network adapter (Intel, Qualcomm, among others.). Then download the latest driver from the section downloads of the driver. You will need another PC to download and install the drivers. Try updating the drivers manually:

Step 1: pulsa Windows + R, place devmgmt.msc and press Enter.

Step 2: right click on Network adapters and select Update Driver.

Step 3: go to “Find driver software«.

Step 4: Click where it says “choose from a list of available drivers«.

Step 5: Select the latest driver from the list and press Next.

Step 6: Restart your computer to save the changes and see if the error can be fixed.

Method 3: Reset network components

The procedure you must carry out is the following:

Step 1: open the symbol of the system. To do this, put 'cmd' in the search section and then press Enter.

Step 2: type the following commands in cmd, one by one. Press Enter after each one:

Step 3: If you get an access denied error, press Windows + R. After this, write regedit and press Enter.

Step 4: navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nsi\{eb004a00-9b1a-11d4-9123-0050047759bc}\26

Step 5: Right click on 26 and click on Permissions.

Step 6: pulsa Add. After this place All and press Accept. Then press Allow.

Step 7: click Apply and then in Accept.

Step 8: Run the above commands again in CMD. Then restart your computer for the changes to be saved.

Method 4: Disable IP Helper service

The steps below will help you resolve the problem:

Step 1: pulsa Windows + R, place services.msc and press Enter.

Step 2: Look for the IP Helper service at the bottom, then right-click on it and select the option Properties.

Step 3: If the service is already running, click Stop and then in the dropdown menu Start type, Select Disabled.

Step 4: click Apply and then in Accept.

Step 5: restart your computer to save the changes.

You may want to know: How To Fix Error Code 5003 In Zoom

Method 5: Disable IPv6

To achieve this, follow the procedure below:

Step 1: press Windows + R, then place the following command and press Enter: control.exe / name Microsoft.NetworkAndSharingCenter

Step 2: Now click on your current connection to open settings.

Step 3: click the button Properties in the Wi-Fi Status window.

Step 4: make sure to uncheck IPv6.

Step 5: click Accept and later CLOSE. Restart your PC to save the changes.

Method 6: Temporarily disable antivirus and firewall

Sometimes the program antivirus can cause an error and you should check that this is not the case. You need to disable the antivirus for a limited time so that you can find out if it is the cause of the problem or not. This is the procedure you should follow:

Step 1: Right click on the antivirus icon in the system tray and press Deactivate.

Step 2: Select the period of time that the Antivirus will remain disabled. It is recommended that you choose the shortest amount of time possible, for example, 15 or 30 minutes.

Step 3: Once you have performed this action, try connecting again to open Google ChromeThis way you can check if the error is resolved.

Step 4: Go to the search bar, search for the Start menu and click on it to open the  Control panel.

Step 5: pulsa  Security system and then press  Windows firewall.

Step 6: From the left window panel, go to Activate o deactivate the Firewall.

Step 7: Choose Turn off Windows Firewall and restart your computer.

Please try to open again Google Chrome and go to the web page that was displaying the error. If that didn't work, follow the same procedure to turn your Firewall back on.

Method 7: Reinstall TCP/IP

Follow the steps below to achieve this:

Step 1: go to the search bar and search control Panel. When you find it press open.

Step 2: from the Control panel, Click on Network and Internet.

Step 3: go to Network Center and shared resources. Press the option Change settings from the adapter (it is located just to the right).

Step 4: Right click on your WiFi connection that is showing the error and select the option Properties.

Step 5: select the items one by one in «This connection uses the following elements» and click Install.

Step 6: in the window "Select network feature type ", Choose Dance and click Add.

Step 7: Go to «Reliable multicast protocol» and click Accept.

Step 8: make sure you follow this for each item on the list and then close everything.

Step 9: Restart your computer for the changes to be saved and to check if the error has disappeared.

Method 8: Reset your network adapter

Follow the steps below:

Step 1: pulsa Windows + R, place ncpa.cpl and press Enter.

Step 2: Right click on your wireless adapter and select the option Deactivate.

Step 3: Right click on the adapter again, but this time choose Activate.

Step 4: restart your computer and try to connect to the network again.

Method 9: Run the network troubleshooter

In this case, you must do the following:

Step 1: press Windows + I to open Settings and then click Update and security.

Step 2: In the menu on the left, select Solve problems.

Step 3: en Solve problems, Click on Internet connections. Then press Run the problem solver.

Step 4: Follow the remaining on-screen instructions to run the troubleshooter.

Step 5: restart your PC so that the changes can be saved.

You might be interested in knowing: 7 Best Programs for Browsing the Internet

That's it, you have successfully solved the IPv6 no internet access problem. We hope that the tutorial was useful to you, we tried to mention as many possible solutions as possible. However, if you have anything to add, you can do so in the comments section. We will accept suggestions from you and will be willing to improve to please you.