Fix HotSpot Not Working Error On iPhone Or iPad

There are many reasons why the HotSpot not workingHowever, it is mainly the network inconsistency that has to do with the cellular, Wi-Fi, Bluetooth and configuration. VPN which may also be responsible for this problem occurring.

After investigating this particular issue thoroughly, it turns out that there are different reasons that could prevent you from setting up a Personal Hotspot within your device. iOSHere is a list of possible culprits:

• Common HotSpot Failure: In most cases, you can expect to face this particular issue due to a glitch that interferes with mobile data transfer. Most affected users facing this issue have managed to fix it by changing the phone name and hotspot password before attempting to set up a personal hotspot once again.
• Incorrect network settings: Incorrect network settings can also be a potential cause of this issue. Several users who are in a similar situation have confirmed that the issue was eventually resolved once they reset their network settings.
• Minor software glitch- It is not uncommon to face this problem if it is a software glitch that sometimes affects the connection bridge between mobile data and a Wi-Fi hotspot. Most of the time, this can be easily fixed by temporarily disabling mobile data before turning it back on. If you find that this problem occurs frequently, you can alleviate the number of occurrences by installing the latest iOS update available.
• Operator update pending: A lesser-known but common culprit that could be responsible for breaking personal hotspot functionality is a pending carrier update that needs to be installed in order to rely on cellular data. If you have intentionally denied the update in the past, you can force it to install from the About tab.

Solutions for Hotspot not working problem

Now that you know all the possible reasons that might prevent you from setting up a personal hotspot on your iOS device, follow the methods below to fix the problem:

1.- Change the phone name and Hotspot password

It turns out that one of the most effective and easy solutions out there is to change the name of the iPhone and the iPad and the access point password.

In addition to allowing you to bring your Personal Hotspot Assistant back from a failed state, this will also serve to force the computer (or other device) connecting to the hotspot to request the password again, thus refreshing Wi-Fi connections.

If you are looking for step-by-step instructions on how to change the name of your iPhone or iPad along with the hotspot password, follow the instructions below:

• The first thing is to access the icon of Configuration from the home screen of your iPhone or iPad device.

• Once you are inside the screen of Configuration, touch General, then touch the menu About from the menu that just appeared.
• Inside the tab About, touch where it says Full Name and press the (x) icon next to the current name.
• Finally, enter a new name and tap Ready to successfully change the name of your iPhone.

• Now that your iOS device name has been set, it's time to handle the password part. To do this, go back to the root directory of Configuration and touches Cell phone.
• Once you are inside the tab Phone, go ahead and touch Personal Hotspot.

• Inside the tab Personal Hotspot , tap Wi-Fi Password, then tap the icon  (X) to remove the current password so you can set a new one.
• Once a new password is applied, tap on Done. After doing so, you will see that all your connected devices will be disconnected immediately.
• Finally, restart your iOS device to allow the network connection to be reestablished.
• After your device restarts, try using the Personal Hotspot feature again and see if the issue is now resolved.

If the problem is still not resolved, please move on to the next potential solution described below.

2.- Reset the network settings

According to many of the affected users, you can also expect to encounter the HotSpot not working error due to a network inconsistency related to temporary data containing information about cellular, Wi-Fi, Bluetooth, or VPN settings.

If this is the source of this issue with the Personal Assistant, you should be able to fix the problem by resetting your network settings to clear any temporary network data cache and reset all cellular settings to their factory defaults.

We managed to find a lot of users who confirmed that once they reset the network settings, they can finally use the personal hotspot functionality.

Here is a quick step-by-step guide that will walk you through the process of resetting your iPhone or iPad's network settings from the Settings menu. Configuration:

• From the home menu of your iOS device, tap the icon Configuration.
• Inside the menu Configuration, touch General, then press Resetting in the dedicated menu that has just appeared.
• Once you are inside the reboot tab, go ahead and press on Resetting net work Configuration.
• After doing so, you will be prompted to tap Reset Network Settings one more time to confirm.

• After confirming your choice, your iPhone o iPad will automatically shut off. This is perfectly normal, so don't panic.
• Your iOS device will reboot with the network cache cleared. Once this happens, try setting up Personal Hotspot once again and see if the problem is now fixed.

If the same problem persists, please move on to the next potential solution below.

3.- Disable and re-enable mobile data

This is one of the few minor software glitches that still exists in iOS software years after iPhone and iPad users started reporting it.

A software glitch affecting cellular data management is often responsible for breaking the personal hotspot feature. Typically, this problem occurs because there is a problem connecting mobile data with hotspot feature.

Nota: Keep in mind that when other devices try to connect to your personal hotspot, they are actually using cellular data from your cell phone plan.

Fortunately, most of the users affected by the HotSpot not working error have reported that they managed to fix this problem. turning off mobile data and then turning it back on to fix the minor software issue.

Follow the instructions below to learn how to do this:

• From the home screen of your iOS device, tap the menu Configuration.
• Inside the menu Configuration, you are going to touch where it says Phone to access the dedicated menu.
• Once you are inside the menu Phone, touch the lever Cellular Data to temporarily disable it.

• Once you get your cellular data disabled, wait a minute before re-enabling it. Mobile data using the same switch.
• Return to the screen Personal Hotspot and see if you can now set up a hotspot without experiencing the same type of problem.

If this issue is still not resolved, please move on to the next potential solution below.

4.- Install the operator update

A lesser-known culprit, but one that can cause a host of internet connectivity-related issues, including the HotSpot not working bug, is a pending carrier update that must be installed to take advantage of mobile data.

Please note that all mobile operators regularly release a configuration update that makes some adjustments regarding the ports, servers and gateway addresses used.

This particular scenario is very likely if you are also having trouble making or receiving calls or sending SMS.

Nota: This process is automatic in Android, but on iOS, you'll need to accept this update manually by accepting it when the pop-up appears.

If an update like this is pending after ignoring the pop-up when it first appeared, you can force it to reappear on the screen by accessing the tab About.

Follow the instructions below for a step-by-step guide on how to force install the pending carrier settings update:

• From the home screen of your iOS device, tap the option Configuration.
• Inside the menu Configuration, touch General admission in the list of available options.
• From the tab General admission, touch About and wait for 15 seconds or more until you see the update pop-up on the screen.

• Once the update prompt appears again, follow the on-screen instructions to update your carrier settings by installing the pending update.
• After the installation is complete, restart your phone or tablet and see if the problem is now solved.

If you try these methods, you will be able to fix the HotSpot not working error. In case you know of another possible solution to this error, do not hesitate to share it in the comments section. See you in a future post.