Fix: Hamachi Service Has Stopped On Windows 10

Many users LogMeIn Hamachi report that they cannot use the program. In most cases, after starting the program a self-diagnosis pop-up window appears identifies an error when the Hamachi service has stopped.

The issue occurs primarily on Windows 10, but has also been reported on Windows 8.

Hamachi is a Windows supported service, but many users are encountering this issue and reporting that Hamachi service has stopped and a message appears when using it.

This is a common error message that causes Hamachi to not work on your computer, but it can be easily fixed.

There are also many other issues related to Hamachi. You can find them below. Try different methods to fix Hamachi service when you see the error message on the screen.

You can also read: 7 Best Programs Like Hamachi

What is the cause of the “Hamachi service stopped” error message in Windows 10?

We have investigated this particular bug based on numerous user reports. We have been able to reproduce the issue on our test machines and have analyzed the recovery strategies used by other affected users.

From what we have been able to determine, there are several common causes that cause this particular error message:

1. Hamachi application does not have administrator privileges: The problem usually occurs because the Hamachi application does not have administrator privileges for some reason. In this case, the error can be resolved by making the application run with administrator privileges.
2. Windows Management Instrumentation service is disabled: Hamachi relies heavily on the Windows Management Instrumentation (WMI) service. If this service is set to remain disabled, this specific error will occur. In this case, enabling the service should resolve the issue.
3. Lack of workstation dependencies: Some users reported that the problem was resolved after using the hotline. commands extended to configure Hamachi dependencies and add a workstation. This issue typically occurs when a user upgrades to Windows 10 from a previous version of Windows.
4. LogMeIn Hamachi Tunneling Engine is not configured correctly: In some cases, it has been confirmed that the issue occurred because the service startup type was not set to automatic. This issue can be easily resolved by going to the Services screen.
5. Third party security interference: Some overprotected AV/firewall programs are known to conflict with LogMeIn Hamachi. Removing the overprotecting package or setting exceptions for Hamachi should resolve the issue in this case.
6. Turn off or disable the Hamachi service This is a common scenario for computers that need to be shut down or disabled frequently. This can be avoided by creating a startup task that protects against these scenarios.

If you are looking for ways to fix the Hamachi Service Stopped error, this article contains a series of proven troubleshooting steps. In the next section Possible solutions are listed that other users in a similar situation have used to solve the problem.

To make the whole process as smooth as possible, please follow the methods presented in the order in which they are presented. In the end, you should find a solution that solves the problem in your specific case.

Fix: Hamachi Service Has Stopped On Windows 10

Method 1: Run Hamachi as administrator

As simple as this solution is, many users have managed to avoid the ‘Hamachi Service Stopped’ error by ensuring that the executable is run with administrator rights.

• For that, Right click on the executable file LogMeIn Hamachi and select Run as administrator.
• To avoid having to do this every time you start the program, you can right-click on the program, go to Properties, click on the Compatibility tab and Select Run as administrator. After clicking Apply, your computer will be configured to run Hamachi with administrator privileges.
• Check if this solves the problemIf it doesn't, move on to the next method.

Method 2: Enable WMI service

Some users who encountered the 'Hamachi Service Stopped' error reported that the error was resolved when the Windows Management Instrumentation service was enabled. Please note that LogMeIn Hamachi relies on the Windows Management Instrumentation (WMI) service to function properly on Windows.

Here's a quick guide on how to ensure the Windows Management Instrumentation service is enabled and dependencies are configured correctly:

• Press the Windows + R keys to open a symbol of the system. Then type “services.msc” and hit enter to open the Services window. If it asks you for UAC (User Account Control), click yes to grant administrator privileges.
• On the Services screen in the right panel, locate the Window Management Instrumentation service. When you see the WMI service, double-click it to open its properties screen.
• In the WMI service properties screen, click on the General tab and make sure the startup type is set to Automatic. If it is not, change the value using the drop-down menu. After changing the startup type, start the service (using the start button) and click Apply to save the changes.
• After starting the service, restart LogMeIn Hamachi and check if the problem has been resolved. If the answer is no, move on to the next method.

Method 3: Change dependencies to add a workstation

The issue may also be caused by the Windows Management Instrumentation (WMI) service not having the necessary dependencies to function properly.

In cases where WMI service was enabled but LogMeIn Hamachi still not working, some users reported that the issue was resolved after changing some dependencies to add a workstation via the extended command line.

Here is a quick guide on how to do this:

• Press the Windows + R keys to open the “Run” dialog box. Next, type “cmd” and press Ctrl + Shift + Enter to open the expanded command prompt window. If you are prompted for UAC (User Account Control), select Yes to grant administrator privileges.
• In the expanded prompt, enter the following command and press Enter to configure the appropriate dependencies: sc config Hamachi2Svc depend= Winmgmt/LanmanWorkstation.
• Nota: When you enter the command, you notice that there is a space after $0027=$0027 and no spaces before it.
• Restart the computer and see if the error is corrected the next time you start your computer.

If you continue to receive the error message 'Hamachi, service stopped', continue with the next method.

Method 4: Configure the LogMeIn Hamachi Tunnel Service.

Some affected users reported that they were able to resolve this issue by setting the LogMeIn Hamachi Tunneling Engine service startup type to Automatic and allowing the service to log on under a local system account.

After a reboot, most affected users reported that the issue was resolved. Below you will find instructions Step by step guide on how to configure the LogMeIn Hamachi Tunneling service:

• Press the keys Windows + R to open the “Run” dialog box. Then type “services.msc” and press Enter to open the “Services” window.
• On the “Services” screen, scroll through the list of services and Find LogMeIn Hamachi Tunneling Engine serviceIf you see it, double-click on it.
• In the LogMeIn Hamachi Tunneling Engine properties window, click the General tab and set the startup type to Automatic in the drop-down menu.
• Select the Login tab, enable the local system account and check the Allow service to interact with the desktop box. Click Apply to save the changes.
• Use File Explorer to get to the LogMeIn Hamachi installation location. By default, it is located at: C:Program Files (x86)LogMeIn Hamachi.
• In the LogMeIn Hamachi folder, right-click hamachi-2.exe and select Properties.
• Note: This executable also runs as an LMI H service.
• Then access the Security tab and select the Users group under Groups or Usernames. Then, make sure the read permissions and execute are allowed. If not, click Advanced and change the permissions accordingly.
• Restart the LogMeIn Hamachi application and check if it works without displaying the same error message.

If the problem persists, follow the method described below.

Method 5: Remove the third-party security suite (if applicable).

As some users have suggested, the problem may also be caused by overprotection of the third-party security suite. Several users who received the same error message reported that the problem disappeared after removing the third-party firewall/antivirus.

If you know your security solutions, you can probably resolve the conflict. setting an exception in your firewall/antivirus settings (thus excluding all Hamachi services from the scan). However, depending on the AV service you are using, the correct action will be different.

After removing the third-party security software, restart your computer and check if the ‘Hamachi Service Stopped’ error is resolved in the following: BootIf the problem persists, move on to the next method.

Method 6: Create a startup task to protect against power failures or malfunctions.

Hamachi services (and dependent services) are known to stop if the computer is turned off or unplugged while the program is running. This may annoy some users, as The quickest solution is to reboot and update the affected components.

However, there is a way to automate the whole process. You can back it up by automatically adding a recurring task that runs the .cmd file on every boot. This will allow you to avoid constant reboots.

This is what you have to do:

• Press the keys Windows + R to open the Run dialog box. Next, type “notepad” and press Ctrl + Shift + Enter to open a new notepad window as administrator. When prompted by UAC (User Account Control), Select Yes to grant administrator privileges.
• Note: It is important to open as administrator. The procedure will not work if you follow the instructions for a normal window.
• In the Notepad window that just opened, enter the following commands in the correct order:

net stop Hamachi2Svc start net Hamachi2Svc start "X:FilepathLogMeIn HamachiHamachi-2-ui.exe" exit

Nota: Note that only on the third line the first part ( *X:Filter* ) is just a placeholder. Replace it with the correct drive letter and path. Finally, the command should look like this: run “C:Program Files (x86)Hamachi-2-ui.exe”.

• Once the code is created, go to File > Save As. Next, in the Save As window, name the file HamachiStart.cmd and change the save file type to All Files. Next, navigate to C:\Windows\System32 and click save to save the file CMD which you just created in the System 32 folder.

Note: If you save the .cmd file to System32, you will not need to enter the full path to the file later.

• Press the Windows + R keys to open another “Run” dialog box. Then type “taskschd.msc” and press Enter to open Task Scheduler.
• In the Task Scheduler, Click Create Task in the right menu.
• In the Create Task window, click the General tab and enter a name for the task. Use whatever name you want. Next, go to Security Settings, make sure your user account is selected, and check the Run only at logon box. Finally, use the drop-down menu under Configure for and select Windows 10 from the list.
• Then access the Triggers tab and click New……. On the new trigger screen, set the “Run task” dropdown to “At startup” and make sure the box at the bottom of the screen is checked for “Enabled”. Finally, click OK To save the changes.
• Then access the Actions tab and click New…….. On the New Actions screen, set the Action to Run Program (using the drop-down menu) and click the Browse button in Program/Calendar (in Settings). Then go to C:WindowsSystem32, select HamachiStart.cmd and click Open. Finally, click OK to close the window.
• Then access the Conditions tab and uncheck all the boxes. Now click OK to save the changes.

That's it. The next time you turn on your computer, it will show you instructions on how to manage Hamachi, whether you want to turn off or turn on your computer.

The last solution to stop Hamachi service

The problem is related to Hamachi drivers or outdated versions of the Hamachi service. Many users claim that they are not able to use the Hamachi service.Installing Hamachi on Windows removes the error.

In this case, please try to contact Hamachi and request information. You can also contact us via the comments for other possible solutions.

You can also read: Solution: “Display Driver Failed to Initialize Error in W10”