Fix: Windows cannot load the system driver for this {{hardware}} (Code 38)

If you are experiencing the error "Home windows domestic cannot load the system driver for this {{hardware}} (Code 38)” on your computer, you should be able to fix this problem using the strategies provided below.

Home windows home cannot load the system driver for this {{hardware}}

If you connect a printer, a digital camera, a memory USB, a mobile phone or a unit storage external to your computer, the drivers necessary for the operation of these devices are inserted through the USB port and mechanically installed on your computer.

However, the outdated model of the driver software often remains active in memory, which causes the “House Home windows cannot load the system driver for this {device}” error on the PC.

In general, this error message can also be caused by third-party software applications interfering with the driver software installation and other causes.

1. Restart the laptop

A simple solution to fix error code 38 on Windows 10 home is to turn off your computer, watch for 60 seconds, and restart.

When the PC shuts down, you need to mechanically download outdated system drivers and mechanically update system drivers after restart.

If that didn't help, you can try different troubleshooting strategies as shown below.

2. Run the {{hardware}} and drive troubleshooter

Windows 10 Home comes with its own “{{Hardware}} and Drives” troubleshooter that should allow you to resolve this issue.

1. Open Settings and click Updates and security.

2. On the next screen, click Problem solving in the left pane. In the right pane, select the appropriate troubleshooting tool and click Run the problem.

For example, if you're having problems with your keyboard, choose Keyboard troubleshooter. If the problem is with a printer, choose Printer troubleshooter.

3. Manually replace the system driver

The problem may be that Windows Home is not able to mechanically replace the drivers installed on your computer.

1. Press the button correctly Start button and click System Supervisor.

2. On the System Monitor screen, right-click on the problem System (Printers in this case) and click on Replace the driver.

3. On the next screen, click Common search to get the latest driver software.

4. Allows Windows Home to search for the latest printer driver and install it on your computer.

Pay attention: If Windows Home does not find the required driver, go to the manufacturers website and check if an updated driver is available.

If a driver is offered, install the driver software on your computer and restart the computer.

4. Uninstall the USB system

Normally the problem is because the USB system is not recognized by the PC.

1. Press the button correctly Starts and click the button System Supervisor.

2. On the system supervisor screen, expand the entry to Common Serial Bus Controllers > Right click on the Unknown system and click Uninstall the system choice.

3. In the affirmation pop-up window, click OK to check.

4. Repeat the above steps for the different affected widgets (if any) and Reboot your computer.

As soon as your computer restarts, House Home windows 10 should automatically load the necessary drivers.

5. Clean boot

As already mentioned, this problem can also be caused by third-party software applications that interfere with your computer's driver settings.

If the problem started after you installed a specific app or program, you can uninstall that particular app and see if the problem goes away.

If you are not sure, turn on your computer in standby mode. Boot regular and check if the problem goes away. If the problem does not occur in regular startup mode, this confirms that the problem is caused by an application installed on your computer.

The next step is to determine which program or application is causing the problem on your computer. To do this, you can selectively activate the applications on your PC and check their influence on it.

• The right way to restart your Windows 10 PC to resolve issues
• The right way to stop apps running in the background in House home windows 10