How to Fix Bootrec Fixboot Access Denied in Windows 10

You have met the “bootrec corrected access denied” error in Windows 10 while trying to fix command line errors commands Do you want to know how to fix bootrec / corrected access denied error? then we are here to help you.

The bootrec access denied error is related to the bootloader. Boot, but it may also be that the cause of this error is a hard drive partition.

In this article, we will share with you the solutions that have helped me solve this problem. Windows 10 has fixed the “boot access denied” error. So, without losing There, let's put the solutions in order.

You can also read: How to Fix “Hard Drive Not Showing” in Windows 10

How to Fix Bootrec Fixboot Access Denied in Windows 10

There are several solutions to fix the “Download Denied” error, but be careful because a small mistake can cause several other problems.

Nota: In this case, it is recommended to create a system disk to prevent further damage. There are many online backup tools, but you can also do it manually by creating a full image backup of your system.

Solution 1: Bootloader Recovery

To restore the bootloader, first prepare a Windows 10 installation disc.

To create the Windows 10 installation media, follow these steps:

• Download Windows Media Creation Tool.
• Next, prepare a memory USB with at least 8 GB of free space.
• Insert the USB flash drive into the system and run the media creation tool. > Accept the agreement.
• Select Create installation media (DVD, USB flash drive, or ISO file) to another PC > click Next.
• Next, select Use recommended settings for this PC > Next.
• Y Select the USB drive > Next
• Then select the drive from the list > click Next.
• Wait for the process to complete.
• When the process is complete, insert the USB drive into the system > reboot, and when the USB boot option appears, Press any key to continue.

Now follow the steps to restore the bootloader:

• Computer Recovery Management > Troubleshooting > Advanced Options > Command Line.
• Then write the corresponding part of the command to disk on the command line>.
• Now type this command> press Enter after each:
  • List of albums
  • Disk 0 (where 0 is the boot drive)
  • Full list (note that the volume is the EFI area, I have 4)
  • Volume 4
  • Assign a letter = N:
  • Departure from
• And select NORTH: (the drive letter you just assigned) > Write Stamp
• Once you have assigned a drive letter using Disk Part >, format the EFI partition using this command:
  • Format N: / FS: FAT32
• Then type bcdboot C:windows/s N:/f UEFI > Click Register.

This command will restore the bootloader. Now try to run the bootrec /fixboot file again. Now you can evaluate the error of accessing the Windows boot fix solution. If it fails, use the next solution.

Solution 2: Perform boot recovery

If the above solution does not work, it is recommended to perform boot recovery which works for many users to fix Windows 10 access denied error fixboot bootrec.

To do this, follow these instructions:

Nota: In this case, you need to boot from the Windows 10 installation disc, so follow the steps in #Solution1 to boot from the Windows 10 installation disc.

• Once the Windows 10 installation disc has booted > Press any button to continue.
• Now go to Computer Recovery > Troubleshoot > Advanced Options > Automatic Repair.
• Then, wait for the result. Auto Repair > appears to follow the instructions to fix the error and refuses to boot.

If that doesn't work, try running the chkdsk command. If you get an error message during the automatic repair.

Solution 3: Run the CHKDSK command

Running the chkdsk command will help fix errors on the hard drive, helping you resolve the Windows 10 fixboot boot recognition error.

Follow the steps below to run the chkdsk command:

• Reboot from the Windows 10 installation diskette (follow the steps in #Solution1).
• And once booted, > ignore the language selection on the first screen > fix your computer.
• Select the following: Troubleshooting > Command Line.
• Then in the symbol of the system, type chkdsk c:/ry > press Enter.

Note: Windows will normally install to the C: drive, but if the drive letter for your system partition is different, enter the correct drive letter.

• Wait for the process to complete and restart your computer.

And try running the bootrec/fixboot command again, if it works, great, but if you get an error message about accessing Windows 10 patched boot, move on to the next solution.

In many cases, you cannot run the chkdsk command. In this case, you will learn how to fix CHKDSK lag or hang in Windows 10/8/7.

Solution 4: Repair the BCD

Follow the steps below to restore Boot Configuration Data or BCD, this may work in case of “access denied” error after bootrec/fixboot Windows 10.

If that didn't work, repair the MBR after bootrec/fixboot access denied on MBR error. Follow the instructions to recover the MBR.

• Restart the computer from the installation diskette.
• Now go to Computer Recovery > Troubleshooting > Advanced > Command Prompt.
• Then enter these commands and press Enter after each command.
  • Bootrec/rebuildbcd
  • Bootrec/Fixmbr
  • Bootrec / Fixboot

If the exit operation completes successfully. Then, restart your computer. Now try to run the bootrec /fixboot command. If this works, then the Windows 10 Fixboot login error will be resolved, but if it doesn’t work, then apply the last solution.

Solution 5: Fix the MBR

Bootrec /fixboot Login Rejected in MBR In some cases, the error also occurs and if the above solution does not work, then try to repair Windows 10 MBR.

To do this, proceed as follows:

• Boot from the Windows 10 installation disc (steps of solution 1).
• Once started, click Next as instructed.
• Then Click Restore your PC.
• Click Troubleshoot > Advanced Settings > Command Prompt.
• Then, in the command line, Enter the following commands one by one and click Log after each action.
  • bootrec/fixmbr
  • bootrec/fixboot
  • bootrec / scan
  • bootrec/rebuildbcd

Now wait for the process to finish and exit the command line. Finally, remove the installation media and modify your BIOS. Then, restart Windows 10.

You should now make sure that permanent boot access to Windows 10 is blocked, but if it isn't, your only option is to reinstall Windows 10. However, first back up Windows 10 by making a system image backup as described above.

Check the status of your Windows PC/laptop:

In many cases, Windows will start reporting errors due to corrupted Windows system files or some internal issues, so scan your computer/laptop with a reliable PC repair tool.

It is an advanced tool that can fix various persistent issues and errors on your computer. You can also fix errors such as BSOD, DLL errors, registry problems, prevent viruses or malware infections malware and more.

It will also optimize the performance of your Windows PC as if nothing had happened. Just download the program and run it. Buy computer repair software to avoid computer problems and errors.

Conclusion

I have tried my best to list all the working solutions to fix Windows 10 Boot Denied error. This solution should work, in your case, to resolve Windows 10 has denied access to boot solution.

To fix Windows 10 Boot Denied error, follow the solutions listed in sequence. Please also enter these commands carefully to avoid further errors.I hope you find this article useful.

You can also read: How to Fix “OpenAL32.dll is Missing” Error in Windows 10