How to Fix “Network Path Not Found” Error

Have you ever gotten the error network path not found? Don't worry, we'll tell you all about it and how to fix it. There are many benefits to having all your devices connected to the same network:

You can access files on one device while using another, or print important documents no matter which computer the printer is physically connected to.

So what should you do if you suddenly find a error code 0x80070035 and the text “Network path not found” when trying to access one of the devices on the network using Windows?

Or the message en Mac OS “There was a problem connecting to the server” The server may not exist or may not be available at this time. Please check the server name or IP address, check the network connection, and try again.”

It might interest you: Fix Error Code 0XD8077900 on HP Printers

If you are using Windows as your operating system

Solutions to basic errors

Before going in to look for problems or solve the error network path not found in the system that requires elaborate solutions, It is necessary to check that some basic principles of the network are being met.

Use valid path names

Error code 0x80070035, Network path not found, can occur when errors were made when entering the network path name. The specified path must point to a valid share on the remote device.

Sharing files or printers Windows must be enabled on the remote device, and the remote user must have permission to access the resource.

Check that the system date and time are updated

The error network path not found could also occur when computer clocks are set to different times. Keep Windows devices on a local network synchronized using the Network Time Protocol.

Disable local firewall

Misconfiguration of a software firewall can cause the error network path not found. It could temporarily disable firewalls, whether it is the built-in Windows firewall or an additional one you have, and check if you can access the requested network resource without the error occurring.

If so, you will need to take additional steps to change your firewall settings to avoid this error so that the firewall can be re-enabled without preventing you from accessing the required resource.

Reset TCP/IP network protocols

This model is a protocol for network communication that allows a computer to communicate within a network. If there is a problem with this protocol, a quick method to solve it consists of resetting Windows components that run in the background and support TCP/IP network traffic.

Although the exact procedure varies depending on the version of Windows, the approach generally involves open a symbol of the system from Windows and enter commands “netsh”. For example, the command: netsh int ip reset.

 Doing so will reset the TCP/IP protocol in Windows 8 and Windows 8.1. Restarting the operating system after issuing this command should return your Windows to a trouble-free state.

Use Network and Sharing Center troubleshooting

Many times, the error the network path was not found can be solved by Windows with the “Troubleshoot” option in the Network and Sharing Center. This tool automatically searches for, detects and fixes basic problems that may occur on any of the computers in your network.

Important Note: If your problem still persists, then you will need to do some further checks on your system.

Review sharing settings

If the basic solutions did not help, do not despair, as there are several solutions to the problem at hand. The first is to check the sharing settings.

Step 1. Check the drive you want to share. In this unit, right-clicking the mouse will present a drop-down menu where you must select from Properties

Step 2. From there go to Share, If the network path appears as not shared, then there is an error, so you should press the button Advanced Sharing, This will take you to another section, where you will need to enable the box Share this folder and also type the drive name (C, D), when you finish, click Apply and then OK.

Step 3. Lastly, press the key combination Windows + R so that the box comes out Run, You will need to type the name of the disk or folder and click OK. If that was the problem and you did everything right, you should now be able to access the requested resource.

Check device manager

If you are still unable to fix error 0x80070035 or Windows network path not found then It's time to check the device manager.

Step 1. Go to Control panel and select the Device administrator. Once deployed, choose the option View which is located in the console menu bar.

Step 2. In that menu, choose the section Show hidden devices, Click on the symbol "+" de Network adapters to deploy them. Several of them will be presented, which you must delete all except the one that best suits the device in question, then restart the device.

Add IPv4 protocol on top of your TCP/IP

Another method that also works as a solution to the failure is to add the IPv4 protocol.

Step 1: To achieve this, you will need to hit the keys Windows + R, that will bring up the run box, in it, type: ncpa.cpl and give it to OK. Any network connections you have should be displayed.

Step 2: Right click on the network connection involved in the problem and choose Properties, In this other section you must enable the box that is named Internet Protocol (TCP/IP) version 4, then press the button Install.

Step 3: Then press the option called Dance and press Add, That in turn will open another tab where you must choose Reliable multicast protocol and give to To accept, With that the problem should be solved and not happen again.

Update the network interface driver

 If you own a computer running Windows Server 2008 SP2, updating the network interface driver might be the solution to your problem.

Step 1. To locate the network device, type simultaneously Windows + R, scribe "Devmgmt.msc" and click Accept.

Step 2. In Device Manager, look for Network adapters and click on it.

Step 3. From the Action menu, select Search for changes hardware to automatically rediscover the network controller and install the necessary drivers.

Step 4. Once the device is located, right-click it and select Update driver software. Select Search automatically for updated driver software o Browse my computer for driver software.

Once updated, it should no longer present any problems.

Use of online tools

If implementing all of the above solutions does not resolve your “network path not found” error, you can use one of the tools available on the Web to check and repair your system.

Some of them are free and some are paid versions. You can select the one that suits you best. For now, you can use PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).

Step 1: Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).

Step 2: Click on start scan to find Windows registry issues that could be causing problems on your PC.

Step 3: Click on Fix everything to fix all the problems. If the network problem your computer is experiencing was detected and fixed by the tool, you should no longer have any problems.

If you are using Mac OS as your operating system

If you encounter failures in the connection attempt to a specific network destination, with the message saying: “There was a problem connecting to the server. The server may not exist or may not be available at this time. Please check the server name or IP address, check the network connection, and try again.”

But in this case, the connection to the target server worked fine previously, the target server exists, the IP is correct and the network connections are active on both sides, and you can even ping the server IP address on the problematic Mac, then try the following routine to get your local area network Macs to detect and connect successfully, as intended.

For this, you will need the destination IP address for your Mac. This IP can be found in the Network Preferences in all versions of Mac OS X.

Step 1. Close all failed network attempts and failed network-related windows in the Mac OS X Finder; this includes the Network Folder or Network Browser in Finder.

Step 2. After the error message appears “connection problem”, turn off Wi-Fi in Mac OS X from the wifi menu bar item.

Step 3. Turn Wi-Fi on in Mac OS X again from the same menu.

Step 4. From the Mac OS X Finder, press Command + Shift + K to open the menu “Go to server” and enter the IP address of the target Mac to connect to.

Step 5. Manually connect to a local Mac server. For Mac use afp:// (destination IP), and for SMB/Windows use smb:// (destination IP).

Step 6. Click on "Connect" and the target Mac should be discovered, then connect as usual, the LAN connection should be established as expected.

Step 7. Once connected, you'll be in the familiar Finder-based browsing of the target Mac (or server), as usual.

Finally, we have seen how this problem can be presented to you. “network path not found”, whether in Windows or Mac OS versions, are easily solved as we have shown you throughout this article, so we hope that these alternatives and simple steps will be useful to you.