Error Detected In Windows Update Database

Did you know about the existence of a error detected in update database Windows? – In case you didn’t know, it is one of the most common errors. In fact, there are a good number of users who report this error daily, and in most cases, it prevents updates from installing correctly. There is even evidence that it prevents the Windows troubleshooter from installing correctly. Windows works as it should.

If you want to know more about this particular fault and how you can solve it without much effort, I invite you to continue reading this guide.

What is the error detected in the Windows Update database?

On many occasions, users may encounter the error detected in the Windows database, especially when running updates. Generally, this is related to problems or malfunctions within the operating system.

However, users who are affected by the error tend to see a message on screen that says “Possible Windows Update Database Error.” As I just mentioned, this tends to appear during Windows Update processes. As such:

• When using troubleshooting to automatically repair some faults in Windows Update.
• When selecting different computer repair functions, for example repairing Windows Update, database damage or Windows components.
• When updates are performed on the Windows operating system.
• If Windows installation is performed manually.

If you look at the error message detected in the Windows Update database, you may see different codes. They may even appear without any code at all. Beyond this, the solutions are the same for all.

What causes the error detected in the Windows Update database?

As I mentioned in the previous section, this is an error that is linked to Windows Update and its components and can occur for different reasons. The main potential causes of this failure are the following:

• Resistances within the corrupt system
• An infection caused by a virus or malware
• Typical software errors
• When the drivers of hardware are obsolete
• If you have a poor or unstable network connection
• When Windows Update cache is out of space.
• Using a Windows operating system key that is considered corrupted or pirated.

Keep in mind that although this error message is usually a precursor to a computer drama, you don't have to worry too much. As I've been saying, it's something you can fix and you'll be able to continue using your computer normally.

How to fix this update error detected in Windows 10

It's normal to feel exhausted or frustrated when you see these types of errors on your computer. But before you give up, I recommend that you arm yourself with patience and try some of these methods to fix the error.

Temporary solutions to the error

Before I mention the technical solutions for this error, you can use these workarounds to fix the situation:

1. Check your network router to see if the error is related to the network. Sometimes, an unstable network can prevent Windows updates from downloading and installing correctly.
2. You can scan your computer with any efficient antivirus software. It is well known that infections caused by malware or viruses tend to cause a wide variety of computer errors. By scanning your computer you can remove any infection that is affecting its performance.
3. You can also try to disable the antivirus installed on your computer. Sometimes, third-party antiviruses are highly sensitive and flag some operating system components to cause errors. Disable it temporarily until you finish the activity.

Now, if none of these solutions are effective for you, you can use the following recommendations to correct the error detected in the Windows update database.

Solution 1: Start your computer in safe mode

It may seem like a repetitive option, in fact, I think it is one of the most effective methods to solve errors. For this reason, do not forget that starting the computer in safe mode This gives you the option to start only the necessary applications. That is, only the most stable drivers will be executed. Also, those processes that may be causing the error will not be started. This way, you can locate and disable the component that is causing the failure.

In order to start your computer in safe mode, you must do the following:

• Press the start button on your computer and select the icon Sustainable.
• Now, you need to press the key Shift and click where it says Restart.
• A new menu will appear, where you have to select the option that says Troubleshoot > Advanced options > Startup settings.
• Press where it says Restart.
• The computer will restart and you will see a new menu: you must select option number 4 to enable safe mode (option 5 also serves to select safe mode with the respective network functions).

Once you manage to boot into Safe Mode, you can run the anti-malware software again to remove any hard-to-reach viruses or uninstall recently-run updates. After you do this, you need to restart your computer and check if the error message is gone.

Solution 2: Restart Windows Update services and delete Windows Update temporary files

Another thing that users tend to report regularly is when something goes wrong with the Windows update services. Resetting or restarting these update services can be very useful to resolve the error. If you don't know how to do it, pay attention to the following recommendations:

• First, you need to press where it says Wins Logo + R together so that the Run dialog box can open.
• Next, you must write the word ms c> and then press where it says  Log in to open Windows Services.
• Afterwards, you must look for the Windows update and do right click on it> then you have to select the option that says Stop if it shows that the current status is “In execution«. However, in case the current status of Windows Update service is not running, you should skip this step.
• What follows is to press the button once more. Wins logo key + E for the section to be executed File Explore 
• Now, you need to make sure to copy this path: C:\Windows\SoftwareDistribution\DataStore > then paste it into the address bar of File Explorer and press the key With this route you can access the DataStore folder.
• Following this, you must press the keys Ctrl + A > then press the option that says  Delete to delete all folders and files located inside the DataStore folder.

• Now you need to open the folder software download.Once inside, you have to copy this route exactly C:\Windows\SoftwareDistribution\Download > then paste it on the File Explorer address bar > and then press the key
• To continue, you must press the keys  Ctrl + A > followed by the option Delete to delete all folders and files in the folder downloads.
• You will complete the process once you restart the Windows Update services. Make sure to return to the window Services > right click on Windows update > and then select where it says Start.

Once you have completed all of the above, you can try to perform the corresponding updates again. Also, you should check if the error message detected in the Windows update database persists or has been fixed.

Solution 3: Repair corrupted system files

When system files are damaged, they often cause the error message detected in the Windows update database. To solve this, it is necessary to fix them, in this way, the computer will function normally.

The best way to achieve this is by simultaneously using the system file checker (SFC) along with the Deployment Imaging Service (DISM). Both tools are included in Windows, and as I just told you, they are functional to correct errors through the symbol of the system.

In order to open the so-called command prompt you must do the following:

• Open the Windows search engine and type the following word cmd.
• Then, you have to select the option of execute as an administrator so that the elevated command prompt can be opened.
• Once you are inside the raised symbol symbol, you must write and paste the commands which I will show you below, when you copy them you must press the Enter key. You have to look for the computer status, find the so-called corrupt files and fix them using the DISM tool. The commands you need to add are:

DISM / Online / Cleanup-image / scanhealth Dism / Online / Cleanup-Image / CheckHealth Dism / Online / Cleanup-Image / RestoreHealt h

It is important that you have a stable Internet connection. Also, keep in mind that DISM tools tend to fail when the Windows Update client is not working.

• The next step is to close the command prompt and open it once again when the DISM process is complete.
• Next, you need to perform the SFC scan so that you can check and repair any errors that the DISM tool might have missed. At this point, you need to type the following command SFC / scannow  and press the Enter key.

DISM scanners usually take a while to complete, so you should at least be patient while the process completes, then exit Command Prompt and try to boot into Windows.

Solution 4: Manually download updates from the Microsoft Update Catalog

If the error detected in the Windows update database persists, you can try to manually download the corresponding updates from the Microsoft update catalog. In addition, you must install them on your computer manually. This method has worked for many users.

• Open the Windows Update option and press the Wins logo. After this, you must write the word Windows Update and press where it says Log in.
• Then, you need to check which updates were not installed: click where it says View History.

• To continue with the process, you must write down the code corresponding to the updates that were not updated.
• Then you need to open the command prompt and type the command systeminfo and press where it says Enter so that the system type appears.
• Now you must visit the official website of the Microsoft Update Catalog.

• Afterwards, you will have to write the code that corresponds to the update you want to install or download and press where it says Enter. You can also click where it says Search.
• When the results appear on the screen, you must select the update that corresponds to your operating system. To continue, you must click on the option that says Download.

• Immediately, a new window will appear on the screen with a link; you must click on the link to start the download.
• After you download the file, you can double-click on it and follow each of the instructions on the screen. This way, you will be able to install Windows updates.
• Once the update is installed, the error detected in the Windows Update database message should no longer appear.

Conclusions

We hope that this tutorial has helped you better understand what you can do to fix the error detected in the Windows update database message. If you enjoyed reading our post, feel free to share it with your friends, family or colleagues. Come back to our portal whenever you want, you will be able to read many informative articles related to the exciting world of technology.