Windows 10 fixes hardware icon missing in Windows 10.

If you want to permanently delete your memory USB from the computer's hard drive, click on "Remove hardware “Safely” is safer than just turning it off. What if the button disappears from your notification area? There is a way to prevent this.

https://www.youtube.com/watch?v=dwcdJ91Vq2sMissing El icono «Quitar hardware con seguridad» puede ser un problema, pero los usuarios también han informado de los siguientes problemas:

• Security Remove hardware icon not working, missing, responding, active and not responding Many users have reported that Safe Hardware Removal does not seem to work on their computer. The icon, according to some users, is unresponsive and sometimes does not even show up.
• The safe removal of hardware icon does not disappear, it is still there and always visible Many users have reported that they are unable to remove the Safely Remove Hardware icons. They claim that the icon appears stuck and is constantly visible.
• The “Safely Remove Hardware” icon is blinking Users have complained that the “Safely Remove Hardware” icon is blinking. It could also be due to a corrupted driver, so make sure to reinstall these drivers.
• The Safely Remove Hardware icon does not show any devices This issue is not common and many users have reported that they cannot see their devices when using secure hardware removal.
• “Safely Remove Hardware” error message You may encounter errors when using Safely Remove Hardware. Most of these errors can be attributed to driver or configuration issues.

Windows 10: How can I open the Safe Hardware Removal window?

Solution 1: Create a hardware shortcut for safe removal

People on the Microsoft forum have noticed that the “Safely Remove Hardware” icon can sometimes disappear from the taskbar notification area, especially in Windows 10. This means that even though the device can be found, it may not appear in the taskbar notification area. This problem is easy to fix. Just follow the steps below.

1. Click on Windows Keywords R You can also do it at the same time. The Run window will open.

2. Run the command and press Enter Please enter Click here You accept :

   • RunDll32.exe shell32.dll, Control_RunDLL hotplug.dll
     

3. You will see the following dialog box You can safely remove any hardware You can click the button to select the device you want to remove and then close this dialog box. Money.

This problem is unlikely to recur. However, if you need to, it is possible to create a shortcut to Safely Remove Hardware on the desktop so that it does not open from Run All. There. Follow these instructions to create the shortcut:

1. Right click on the desktop to go there New>Rope cutting .

2. Please use the shortcut address below:

   • RunDll32.exe shell32.dll, Control_RunDLL hotplug.dll
     

3. Please click on Next change the name You can safely remove any hardware .

4. Please click on Finished.

Solution 2 – Change notification settings

Many users have complained that they cannot find the “Safely Remove Hardware” icon on their computers. This icon is likely hidden on the taskbar. You can reveal the icon by clicking on the arrow located at the bottom left corner. To pin the icon to the taskbar permanently, if the icon is present, you can do the following:

1. You can connect a USB flash drive or other storage device. storage removable directly to your computer.

2. To expand the taskbar section, click the arrow in the lower right corner.

3. Find the icon now Safely disassemble the hardware Drag it to the taskbar.

This will make the icon visible when you insert removable media.

The Settings app can also change settings.

1. Click on Windows key + I To open the application Settings .

2. Once opened App go to The customization section .

3. Choose from the menu on the left Taskbar . Click Now in the notification area Choose the icons for the taskbar .

4. Search Safely disassemble the hardware Make sure it is activated.

After doing this, your taskbar should display the icon.

Solution 3 – Reinstall your devices

User reports suggest that this issue can be resolved by simply reinstalling the devices. The problem may be with the driver.

The problem can be fixed by uninstalling the driver and letting Windows reinstall the drivers. It's easy and you can do it by following these steps.

1. Click on Windows key + X To open Win + X, click on the menu and choose Device administrator You can also choose from this list. Right-click to open this menu Starts .

2. Si Device Manager opens opens, goes to Look! Be sure to check Show hidden devices .

3. Navigate to this section Universal Serial Bus Controller Delete USB drivers. Just right-click on any device to select “Delete USB Drivers” option Uninstall the device You can find the full menu here.

4. The confirmation dialog box should now appear. Just click on the dialog box uninstall Remove the device.

   Notice: You may need to remove all devices from this zone before you can fix the problem.

After you've fixed the driver issue, plug your USB device directly into your computer and Windows 10 should recognize it. The "Safely Remove Hardware" icon will appear once your device is recognized.

Solution 4 – Restart Windows Explorer

This tool is recommended for numerous PC problems

• Fix common mistakes

• protection against file loss

• The consequences of malware

• Repairing corrupted documents

• Replacing files

• Hardware failures

• Performance optimization

Automatically detect and fix Windows problems

▼ FIX NOW

Very well rated

While this may be a temporary solution, several users claimed that it was effective. You can easily restore the “Safely Remove Hardware” icon by restarting Windows Explorer. Follow these steps to do so:

1. Use the press Ctrl + Shift + Esc Open The Task Manager .

2. Find Now Windows Explorer Right-click the drop-down list item. Make a selection Reboot Select from the menu.

Windows Explorer should restart after doing this. The Safely Remove Hardware icon will reappear. It is important to note that this solution will only be used when the problem occurs again.

Solution 5: Rewrite the device policy

You can change the device policy to fix the missing “Safely Remove Hardware” icon. Plug in your USB flash drive and follow the steps.

1. Click here Device administrator .

2. Enlarge The hard drive section Section and double-click on your removable storage.

3. Once the window opens Intellectual go to The Policies tab . Please select Best performance Click here OK Save the changes.

4. Optional: Some people recommend you repeat these steps again and select another option. Quick removal . Although not mandatory, switching between the two can sometimes solve the problem.

This option must be enabled. The “Safely Remove Hardware” icon will reappear on the taskbar.

Solution 6 – Check if the Plug and Play service is working

Windows needs many different services to run properly. The Safely Remove Hardware prompt may not be present. This will check that the necessary services are running.

1. Use the press Windows key + R you can enter services.msc . Click on Please enter Click here OK .

2. As soon as the window opens Services Finds Play and learn Double click on it.

3. Now the Properties window appears. . Check the Service status . Press the button if the service is not running Starts Click here to start it. Then click here Please request you can find it here You accept Save the changes.
   

   Notice: Some people suggest changing the settings Types of Startups From Manual You can find more information at Automatic You might want to consider that too.

While it's unlikely that your Plug and Play will stop working, there are some issues that can occur. Make sure the service is working properly on your computer.

Solution 7: Use third-party software

The Safely Remove Hardware icon may not be displayed. You may want to consider a third-party solution. Users have reported using USB Disk Ejector to safely disconnect their USB devices.

You can safely disconnect any USB storage device using this free and portable application. USB Disk Ejector is a great alternative to secure hardware removal.

It's that simple. I hope you don't mind that the "Safely Remove Hardware" icon doesn't work. Comment below if the Safely Remove Hardware button is what you choose to use to remove your USB or other peripheral. Or you'd rather just remove the USB.

Editor's note The original November 2015 publication of this post has been completely rewritten and updated to reflect the latest accuracy, completeness and freshness.

Windows 10 login screen slow, stuck, frozen[FIX]

Windows 10: How to use the trusted devices feature

Windows 10: Cannot sign in to device in Windows How to fix it

The target device does not have enough resources to complete the operation[Fix]