Windows 10 computer stuck on restart Here are the 4 possible solutions

The reset process of Windows 10 should be easy. Some issues may occur during the reset/reboot process.

This can mean that the computer takes a long time to boot up or even freezes during the restart. The computer then remains in the restart sequence for quite a while. Sometimes the restart is completed within a few minutes. In other cases, it can take several hours.

You need to use specific tools to troubleshoot when Windows 10 restarts freezing. This will allow you to stop the Windows 10 restart process from continuing. Here are some ways to fix it.

What should I do if Windows 10 freezes on restart?

1. Shutdown Windows 10 system

Reboots can get stuck for many reasons. In most cases, the problem is easily fixed with a reboot.

To restart your computer, you must first turn it off. This is easy with an intuitive method: hold down the power button for 6 seconds or until the computer turns off.

This is a method you may have used before, but we believe the best solutions are the ones that are rarely used.

2. You can reboot without having to connect the devices

Drivers can conflict. Conflicting drivers can cause reboot blocking if they are of the same hardware different. Follow the steps above to force close Windows 10.

Disconnect all devices, such as an external hard drive or USB drive. SSD additional. Your phone and your memory USB They must also be disconnected. You should only use your computer's keyboard/mouse.

After the restart, you can try to reboot your device. If everything goes well, connect your peripherals.

You should update/reinstall drivers for your hardware components when you update them. Doing so can fix any possible glitches in the reset process.

If your computer restarts frequently, you can follow these simple steps to fix the problem.

Follow these steps to complete your driver update/reinstallation:

1. Launch the Windows 10 Search Console by clicking the Cortana button (located next to the Windows Start button).

2. Enter the following information in the search field Device administrator Click on the first result.

3. The Device Manager window now appears in Windows 10

4. You can access all installed drivers from the list.

5. You can right-click these entries to select “update,” or you can choose to uninstall them to remove them later.

6. When you're done, shut down your computer and restart it.

Did you know that Windows 10 users are the most likely to have outdated drivers? Use this guide to stay ahead of the curve.

Your system will run smoothly if you keep your drivers up to date. This driver update tool is 100% safe and has been tested by us. You can avoid any data loss or permanent damage to your computer.

Disclaimer Some features are subject to a fee.

3. Terminate non-reactive processes

An unresponsive background process may be the reason why the reboot may take so long to complete.

The Windows system may be trying to install a new version, but it stops responding correctly after the restart operation. Or a system scan has been started and something seems to be working correctly, but the scan stops.

If this happens, your Windows 10 computer will not be able to connect to the Internet. Keep an eye on unresponsive processes and terminate them.

1. Press Ctrl+Alt+Del from the Windows 10 loading screen.

2. The window will replace the reboot sequence Task Manager .

3. If a task is not critical to the launch, it should be performed.

.

4. When you are done, close the Task Manager window.

5. Everything should now be working fine.

This guide will show you how to stop all processes in Windows 10.

Task Manager not working in Windows 10 You can quickly fix this by following these steps.

The following steps can be used to restart the update operation, if you have a problem with an update that cannot be applied.

1. Go to the bottom left corner of your screen and click the Windows Start button.

2. Use the Symbol of the system for (Admin)

3. Use the window cmd to write net stop wuauerv And press Enter, to stop all processes related to the update

4. Type and return to the cmd window cd:%systemroot% Then continue with ren SoftwareDistribution SD.old By net start wuauserv .

5. The update process will now restart.

You can only access Command Prompt through administrator if this guide is helpful to you.

4. Launch the Windows 10 troubleshooter

1. Click Cortana to open the search box in Windows 10.

2. Enter the following information in the search field Problem solving Select the desired result and click on it.

3. The Control Panel window should open.

4. In the left panel, click View all .

5. You will see a list of troubleshooting programs for Windows 10.

6. Click here Maintaining your system

7. If prompted, click Apply repairs automatically.

8. Follow the on-screen instructions and complete the troubleshooting.

9. Once you're done, restart your Windows 10 PC.

This article will help you if the Troubleshooter does not load correctly or if an error occurs.

I can't access Control Panel in Windows 10 This step-by-step guide will help you find the solution.

If the problem persists, continue with the steps above and use the power troubleshooter.

You can run a system files check with the command SFC / scannow An elevated Command Prompt window is available.

To help you troubleshoot scannow issues, we have provided a detailed guide to help you resolve issues like the command failing to execute or the task not being able to complete.

Conclusions

These methods will fix the Windows 10 restart issue. You can also share with us other possible solutions in the comments section below.

We will be happy to answer any questions you may have.