The system cannot find the specified path. Windows 10

If you have received a message saying “The system cannot find the path specified”, you are experiencing “ERROR_PATH_NOT_FOUND 3 (0x3)”. This problem can occur for a variety of reasons.

Throughout the tutorial we will explain what this “headache” is, what its possible causes are, and the solutions for each case.

He is very attentive to instructions; when it comes to computing, every element is important.

What we mean by this is that missing or misplacing an instruction can damage the process, or worse, your system, so pay close attention!

Maybe you may be interested: Error 0x800704ec: 6 Ways to Fix It

“The system cannot find the path specified” How to solve this error

As we mentioned above, the problem can have several causes. It is necessary to study each case separately:

1. Check the antivirus you are using

Many users have claimed that disabling their antivirus solved their problem. However, this is not the case in all cases. Try temporarily disabling it, but if you still have the problem after this, you should probably remove it completely.

In the latter case, you would have to use a different antivirus. There are several on the market, but if you want complete protection and something completely reliable, you should try BullGuard.

2. Repair the registry

The easiest way to repair your registry is through the use of a specialized tool. CCleaner is very good, in fact it is one of the most recommended. You should never forget to make a backup, just in case something goes wrong. In case you have not installed any registry cleaner, you can take it as your first choice, it will not disappoint you.

3. Do an SFC analysis

Another reason why you might be seeing the error phrase could be the corruption of one or more files. Many times, the installation of a program is damaged. Windows, and this brings many errors. But not all is lost, performing an SFC scan can help you. To do so, follow the steps below:

Step 1: go to start and type CMD.

Step 2: choose the symbol of the system. It will be displayed at the top of the screen.

Step 3:: Once the command prompt is open, run the command SFC / scannow.

Step 4: After you have performed the previous step, the scan should begin. This may take ten to fifteen minutes, so don't despair. You should also not touch your computer until it is finished.

If after having followed this entire procedure the problem persists, you need to perform a second analysis. But this time we are talking about the DISMIt will be quite simple. You just have to follow these steps:

Step 1: restart the command prompt.

Step 2:: places DISM / Online / Cleanup Image / RestoreHealth and press Enter.

Step 3: DISM scan will start repairing. In this case you should wait approximately 20 minutes. The process should not be interrupted.

If the problem is not resolved after the scan is complete, repeat SFC again.

4. Update the operating system.

The fact that you are experiencing the error related to the path not found may also be due to the fact that your system is not updated. Therefore, you need to install the new updates. To do this, do the following:

Step 1: Press Windows+I to open Settings.

Step 2: go to Update and Security.

Step 3: go to the right panel and click on Search for updates.

Step 4: The system will search for any available updates. After installing them, it will download them automatically. Once they are all downloaded, restart your computer. When you restart it, the problem should be gone.

You may want to know: How to Fix Error 0x80070002 on Windows

5. Clean temporary files

Los Temporary files or very old files can also be the reason why the system cannot find the specified path. This can be solved only by deleting such files. The best way to do this is to use the free up disk space tool. Here are the steps you need to follow to get it up and running:

Step 1: press Windows + S and then proceed to enter hard drive cleaning.

Step 2: look for the option “Free up hard drive space".

Step 3:: choose the system drive. By default, it should be C.

Step 4: pulsa Accept.

Step 5: will begin scanning your drive.

Step 6: A window corresponding to the space liberator will open where a list will be displayed.

Step 7: Select all the files. After you've done that, press Accept.

Step 8: This is optional: if you wish, you can click the “Clean system files” so that very old files are deleted.

Check if the problem persists. Some of the users have claimed that the Windows.old folder was the culprit. Therefore, you should make sure that you have selected “Previous installations” when you use the disk liberator.

6. Run a chkdsk scan

It may be that a certain file corruption is causing the error message to bother you. The solution to this problem can be achieved by performing a chkdsk scan. The procedure is quite simple. Just follow the steps below:

Step 1: proceed to start the command prompt, but as administrator.

Step 2: Once the command prompt is open, type chkdsk / f X and run that command.

Step 3: Replace the letter X with the letter that represents your system drive. In most cases, this is the letter “C".

Step 4: The system will ask you for the programming of a scan. To start press “Y”.

Step 5: restart your computer. Before your PC starts again the scan will be ready.

Check if the problem is gone now. If not, you can scan the other partitions.

7. Download the file or application again

This issue can also be caused by the download being damaged or corrupted. In such a case, re-downloading the file may help. It is recommended that you use a backup manager. downloads.

8. Change the site file

Although it may seem silly, changing the file that is causing the “The system cannot find the path specified” error may help. Try moving the file to a different folder, but within the same drive. If that doesn’t work, move it to another drive.

On the other hand, you should make sure that the folder you are going to move the file to is not set to “read-only”. This procedure will help you check this:

Step 1: click on the folder.

Step 2: press “Properties".

Step 3: go to “Attributes".

Step 4: Check that the option “read only” is unchecked.

9. Remove the software that is causing the problem

Applications from unauthorized sites are also among the causes of the error. If you have any of these, it is advisable to remove them. It is recommended that you use specialized software such as Revo UninstallerThis software makes sure that all the files related to the application are completely removed.

10. Restore the system

If the error has been occurring for a short time, you may be able to resolve it with a restore. Here are the steps you should follow:

Step 1: Balance Windows + S.

Step 2: writes "System Restore".

Step 3: Look at the menu and choose “Create restore point".

Step 4: press “System Restore".

Step 5: When you see the restore window, press next to continue the process.

Step 6: brand "Show more restoration points”, if you see that it is available.

Step 7: Select the point you want and press “Next".

Step 8: follow the instructions that will be displayed on your screen.

You need to know: Clock_Watchdog_Timeout Error: 8 Possible Solutions to the Blue Screen

We hope you have managed to find your solution among our alternatives. As you may have noticed, there are many causes for this error, so it is necessary to explore each of the options. If you wish to leave a comment, you can do so in the section dedicated to this. You are also free to recommend topics related to the IT field. We will take your suggestions into account.