Learn how to fix iPhone stuck on Apple brand

The problem of traffic jam iPhone on the Apple brand can be caused by a wide range of causes. Below you will find the steps to fix this problem on the iPhone or iPad. iPad.

iPhone stuck on Apple brand

When you boot up the iPhone, it goes through the method of Boot of your processor, checks your memory and makes sure that all of its internal parts are in order.

While these actions are taking place in the background, the iPhone continues to display the white Apple label, until all of these mandatory background actions are completed.

If the iPhone does not complete its startup actions, it may continue to display the white Apple mark and will not exit this screen.

This can happen due to a wide range of causes, starting from crashed applications, corrupted system data, or {{ issues.hardware}}.

1. Reboot iPhone

If you're lucky, your iPhone might get past the Apple-branded screen after a thorough reset.

iPhone 6/6S and earlier: Hold down Residence + Sustainable buttons, until the Apple Brand disappears and reappears (throws the buttons when the Apple brand reappears)

iPhone 7/7 Plus/8/8 Plus: Hold down Power + Reduced quantity buttons, until the Apple Brand disappears and reappears.

the iPhone X: Press and release the button Quantity button > press and release Reduced quantity > Then press and hold the Aspect (ON/OFF) button until the apple mark reappears.

2. Use Protected Mode to repair Apple brand iPhone

This methodology is suitable in case your iPhone gets stuck on Apple's Brand after installing a third-party app or during or after your jailbreak attempt.

If your iPhone appears on the white Apple-branded screen, follow the steps below to put your iPhone into Protected Mode.

2.1. Turn off your iPhone

iPhone 8/8 Plus, iPhone X and later: Hold down Reduced quantity e Facet Button (ON/OFF), until you see the possibility to slide to the OFF power. Slide the Slider to show the iPhone turned off.

iPhone 7/7Plus: Hold down Faceted button (ON/OFF), until the Power Off slider appears. Drag the slider toward iPhone power off.

iPhone 6/6s/5/5s and earlier: Hold the button Power (ON/OFF), until you see the Slide to Power Off screen. Slide the Slider to turn off your iPhone.

2.2. enter protected mode

Hold the button Power buttonuntil you start with the Apple brand > launch the Sustainable once you see the Apple branding and instantly hold the button Quantity button.

Keep holding the Quantity until the iPhone boots into protected mode.

2.3 Remove third-party applications

With your iPhone in Protected Mode, uninstall any recent third-party apps you just installed on your device and Reboot your iPhone.

3. Use restore mode

If the problem is caused by corrupted software and system data, then it is best to try to fix the problem by forcing your iPhone into recovery mode.

When you put your iPhone into recovery mode, iTunes gives you the option to erase everything on your device and reinstall the latest version of the software program. iOS.

The steps to enter Restore mode are completely different depending on your iPhone model and you can find out about them in this information: Learn how to put your iPhone in Restore mode.

4. Use DFU mode to repair your Apple brand iPhone

DFU mode erases all data on your iPhone and reinstalls all iOS software and firmware on your device.

The steps to enter DFU mode are completely different depending on your iPhone model and you can refer to this information for step-by-step instructions: How to Enter DFU Mode on an iPhone.

After entering DFU mode, you can set up your iPhone as a new gadget or restore your iPhone using a secure backup.

• Learn how to save your iPhone's battery
• Learn how to find out if someone has blocked the amount on your iPhone