How to Setup a WiFi Connection with a Router – (Dongle Option)

would you like to know how set up a WiFi connection with a router Dongle and other brands? For computers that do not have a built-in wireless or WiFi card, an external dongle is the best way to add wireless functionality to the system.

These use a connection USB to communicate with the computer and work just like an integrated card would. Since USB is used as the interface, a WiFi dongle can be used on both computers portable as a desktop.

Setting up a WiFi connection with a dongle router to connect wirelessly is relatively easy and usually takes less than 10 minutes. Let's look at the methods to do so:

Here you may be interested in reading about: How to Add Social Media Links to Youtube

Basic instructions for setting up a WiFi connection with a Dongle router and other brands

1. Step 1:: Plug the WiFi dongle into the USB port on your computer. As it is powered via the USB connection, there is no need to plug it into an external power source.
2. Step 2:: Wait for the computer to recognize it. Once initialized by the operating system, a word balloon will appear at the bottom right of the screen.
3. Step 3:: Insert the installation CD supplied with the WiFi dongle.
4. Step 4:: Follow the steps on the screen to install the device. If the installer prompts you to restart your computer, perform a full restart.
5. Step 5:: Then, wait for the computer to completely boot up before proceeding to the next step.
6. Step 6:: Double-click the WiFi icon in the lower right corner of the screen, next to the clock. A list of wireless networks appears.
7. Step 7:: Select your router from the list to connect.

NOTE: : If you have enabled encryption at the router level, you will be prompted to enter your password. Once the wireless tool completes the connection, the dongle is fully configured.

Tips and Warnings

1. WiFi dongles can be found at most major electronics stores.
2. Always ensure a wireless connection, to ensure that strangers cannot access your network.

How to configure a Wi-Fi connection with a router from other brands (TP-Link)

Almost everyone who connects to the Internet in the villages does so via 3G and 4G USB modems. All because there is no possibility to connect the usual wired Internet, yes, and ADSL cannot be connected everywhere (Besides, not everyone has a telephone line). Therefore, you have to use wireless 3G/4G Internet.

No matter where you live and what your internet is like, sooner or later you will probably want to install a Wi-Fi router at home. To distribute the Internet to all your devices: smartphone, tablets, laptops, etc.

After all, when we use the Internet via a USB modem, the Internet can only be on one computer. And what to do with other devices, how to distribute 3G Internet from a modem to other devices via a Wi-Fi network? In which we will now understand, on the example of TP-Link routers.

How to choose a TP-Link router for a 3G modem?

We will need a special Wi-Fi router, which supports 3G/4G USB modems. Exactly special router In our case, we consider TP-Link devices. Since not all routers know how to distribute the Internet from 3G modems. And even if you already have a TP-Link router, it is not a fact that it will support working with modems, even if there is a USB connector.

You may often wonder how to set up a Wifi connection with a router TL-WR741ND TL-WR741ND TP-WR841ND, to the modem. Yes, it just doesn't support them.

TP-Link presents several models suitable for working with modems from Intertelecom, MTS, Megafon and other operators. These are two ordinary routers: TL-MR3420. y TL-MR3220. 

And two laptops: TL-MR3020. , I TL-MR3040. 

There may already be other models available. This means that these routers can be connected to our modem via a USB connector and we will receive Internet via the network cable of the Wi-Fi network. For example, for a desktop computer.

Very important moment. If you have already bought a router and have just realized that it is not suitable for you, it is not too late to return it to the store.

And if you're going to buy, make sure the router model you select is specifically compatible with your 3G/4G modem. Yes, routers don't work with all modems. And you can disable the router from simply not seeing your USB modem.

What would check compatibility?

To check compatibility you can do this process:

1. Step 1:: go to Official site, in the "List of compatible USB/3.75g modems«
2. Step 2:: Click on the router model you need and save the xlsx file to a computer.
3. Step 3:: Open it and check if it supports modems.

I think everything is clear with the choice of the router. Now consider the process of connecting the 3G modem to the TP-Link. We also configure the router to work with the modem and set up the Wi-Fi network. We will show you on the example of your TP-Link TL-MR3220.

Setting up a Wi-Fi connection with a TP-Link 3G router

Nothing difficult. We connect the power supply to the router and turn it on. In the USB connector of the router we connect our 3G modem (It is possible through the extension, if there is an antenna, then connect it too)

We need to connect to the computer's router to go to the settings. You can connect via cable (as shown below) or via Wi-Fi network.

1. Step 1:: First in the control panel, open the Network tab. - Internet access. Highlights 3G/4G only (recommended)and press Save.

2. Step 2:: Open more tabs – 3G/4G. . On the contrary 3G/4G USB Modem It must be written Casual (or modem name).

NOTE: : This means that the modem is configured and ready to work. If the router does not see a USB modem, try updating the router firmware according to the instructions. There is a chance that after the update everything will work.

3. Step 3:: in the menu Locationchoose the region and in the menu Mobile ISP. Choose a provider. Also, the connection mode.
4. Step 4:: Salt of Connect automatically. , I ID Typeof the exhibition  .
5. Step 5:: Click on the Connect button. The router should connect to the Internet via our modem. The status should be . If so, everything is fine, press the save button To save the settings.

There is still a button Advanced Settings If you tap on it, it will open the settings where you can manually configure all the options you need to log in. (Dial-up number, username, password). But these settings are unlikely to be used by you.

We have already configured almost all of them. If the router «became a friend» from the modem and connected to the Internet, then it is already distributed on the cable network and Wi-Fi, it only remains to configure the wireless network. Change the name of the wireless network and set a password on Wi-Fi.

6. Step 6:: open the Wireless tab. We specify a name for the Wi-Fi network and install our region. Save the settings by clicking Save.

NOTE: : Don't forget to save the settings by clicking the button. To safeguard. We also advise you to change the standard administrator password, which is used to log in to the router settings. It can be found in the tab System tools - Password

After that, reboot the router. This can be done the same way with the control panel Tools tab of the system. – Reboot and click the button Restart.

The router will reboot. It will now automatically connect to the Internet via a 3G modem and will distribute the Internet via Wi-Fi and via a network cable. Connect to the Wi-Fi network using the password we set during the setup process.

Now, via a USB modem, we can connect several computers and other devices to the Internet. At the same time, payment remains the same as before. But if you have a tariff with limited traffic, you should understand that several devices will use the limited traffic faster. And very often the traffic that is not cheap is over the limit.

Problems and possible solutions to setting up a Wi-Fi connection with a router

Now, let's look at the problems and possible solutions for configuring a Wi-Fi connection to a Router:

Unstable job, Internet disappears very often.

Of course, 3G wireless Internet is not as stable as wired Internet. Therefore, the modem may periodically lose connection with the base station. The Internet may disappear on these devices connected to the router. On the computer it will be "without internet access» (limited in Windows 10).

If there is no Internet and it doesn't appear, simply restart the router (unplug it and turn it on). Of course, it all depends on your provider and the base station you are connecting to. The Interelectron has it. Sometimes you need to restart the router. And sometimes that doesn't help, you have to sit and wait for the Internet to gain.

After connecting the 3G modem to the router, it does not connect to the Internet.

Most likely, this is due to a poor signal. In this case, we apply exactly the same advice that I gave above: we issue the modem, install the antenna and configure all the activities of the AxestelPst EVDO BSNL 1.67 program.

Epílogo

We are dealing with this part of the article to provide all the necessary information that will help you choose and install a TP-Link router, which will connect to the Internet via a 3G modem and distribute it to all your devices.

This is a very relevant topic, as more and more providers provide completely unlimited tariffs and more and more people want to use the Internet via Wi-Fi in mobile devices, tablets, etc. and without a router not here.

We understand how to configure a Wifi connection with a standard router

Please note right away that any router will not work to solve this problem. You will need a special model with a modem connection function, that is, a router with a USB port for a modem. We will tell you in detail what to do.

So, setting up a Wifi connection with a router for a USB modem looks like this:

1. Step 1:: Install the software from the discs included with your router and USB modem.
2. Step 2:: Disable PIN verification on the SIM card. It is necessary. If there is an inspection that the router simply cannot understand, the Internet will not work. You can disable it generally using the mobile phone. Just insert the SIM card into the phone and disable PIN verification in the settings.
3. Step 3:: Plug the modem into the router's USB port.
4. Step 4:: Connect to a router from a laptop, go to the control panel. To do this, suck the address line in the browser, and it will fall into the desired place. See the desired address you can on the device panel. In addition, on the information label and in the instructions it is also always indicated.
5. Step 5:: In the router menu, we are looking for the button «Connection","Internet","Activate modem connection«. These buttons may be slightly different, but the essence should be approximately the following. We are interested in the function of the modem connection. It must be turned on.
6. Step 6:: After power on, restart the router. You can press the button Restart in the menu bar. The router itself can also be physically reset: remove the plug from the socket and insert it.

Now you know how to connect a USB modem to a router. Usually, this process is carried out simply and there are no difficulties, but they are not excluded yet. For example, you need to configure the modem on the computer. An unconfigured modem will not work with the router.

The advantages of setting up a Wi-Fi connection with a standard router using this method

A router with a USB modem port is a good and practical solution that has its advantages and disadvantages. So, the advantages can be attributed to the relative simplicity of the connection. That is, you don't have to stretch all the cables, make holes, etc. Just connect the USB modem through the router and everything is ready. True, that's where the benefits end.

less cost

The main cost of such a connection is the high cost of equipment and tariff. At the very least, the USB modem router will cost more than the standard Wi-Fi router without a USB port.

In addition, you will also need to purchase your own modem, which can cost even more than the router itself. Depending on the operator you choose, the tariff rate may also be higher or lower. But in any case, the subscriber tariff will cost more than the one offered by a local provider.

Connection speed

If an urban network involves an Internet connection at a maximum speed of 100 Mbps per second, the modem will not be able to offer these speeds. Although it will use the fourth generation (4G) data network, the actual speed will be around 15-20 Mbps per second, which I must admit is quite good.

But, most likely, the modem will use third generation (3G) network technology, and if the real (and not advertised) speed will be at least 5 Mbps per second, then that's not bad. At the very least, you can watch movies online at that speed. Therefore, before connecting a USB modem to a router, make sure that the Internet is real.

Is there another way out?

Some users often wonder if it is possible to connect a router to a USB modem without a USB port. To do this, of course, it is possible, but it is extremely difficult. The idea is to open the router, solder the USB interface and flash it with a special firmware, which «ve» a USB port. But few people practice such a system. However, there is another interesting way.

How to set up a Wi-Fi connection with a router to a laptop

If you have a modem, but there is no router with a USB port for a modem, connect to the Internet and create a home Wi-Fi network. The network uses an ordinary laptop. Only the laptop itself will replace the router for us. The main thing is that the laptop has a working Wi-Fi adapter.

The easiest way is to use connection programs. By the way, it is available on the Internet for free, but it also has a paid version with wider functionality. We will go for free. Download it, install it on your computer and run it.

There we have to fill in the lines:

1. Access Point Name is the name of your network. In the free version it will be standard, it is impossible to change it.
2. Password string: Enter the password that will be used to access the network.
3. Internet sharing chain. You need to select the Internet signal source from the drop-down list, which will be used to distribute a Wi-Fi connection. Choose on the modem:
   1. When sharing, select the Wi-Fi item.
   2. In sharing mode, select WPA2 encryption.

Now click on the big button below – Start Hotspot. So we turned our laptop into the hotspot. Now it will distribute a Wi-Fi connection instead of a regular router.

If you can't set up WiFi connection with a router for some reason, you can use others. For example, the free program MyPublicwifi offers the same functionality. In addition, there is a program MyHotspot with similar characteristics. You can't use any programs at all. The built-in hardware in Windows 7 systems allows you to make a laptop hotspot, but you will have to modify it. It is better to use third-party programs.

That's all. Now you know how to connect a USB modem to a router and distribute Wi-Fi from a laptop without a router.

Why can instructions on how to set up a Wi-Fi connection with a router to a 3G USB modem be useful?

The reasons can be very indecent, but in fact they are not always justified. What does it mean? For example, you were going to install equipment for installing the Internet, you were already prepared for the call from any Internet provider, and suddenly a 3G modem appeared to you to access the network.

You might think: Why then do you usually need a provider with meter cables, connected telephone line (Not always)? If you can just insert sims and enjoy watching movies online by installing this USB modem on the computer.

To answer this question, let's get closer to such a wonderful device.

Users strive to ensure that the 3G modem provides Internet access to more than just one device.

USB 3G-Modem allows any user to access the web by simply inserting this device into a special slot on a laptop or computer. It is very useful.

You don't need to wait for the master to arrive, go to the headquarters of the Internet providers, select Tariffs. It is enough to connect the device to a computer and follow the simplest instructions. Since the 3G USB modem works through an installed SIM card, it is advisable to remember the signal level in your room. Depending on this, choose the most suitable network. If you have something bad in the house, for example, a megaphone, buy a modem with a SIM card of the specified operator.

Despite a large number of advantages, such a modem has a number of disadvantages. These include the fact that the access to the World Wide Web will be received only by the device to which such a modem is connected. Of course, there are ways to eliminate these problems (for example, using third-party software). In addition, the developers have provided a popularity factor. Therefore, now the most famous portable 3G Wi-Fi routers. Their disadvantage is that they have to be charged. But there are no portable devices without charging, so you have to put up with it.

In fact, let us return, in fact, to our question: connecting 3G USB modem to router. It will be useful if the traffic and speed provided by the modem is sufficient for you, and there is a router for wireless communication at home (although this can also be purchased). Then you can connect to the network from any device. WiFi wireless services.

However, it is also important to note that not all routers support the function of connecting an external modem. Therefore, before purchasing, consult a specialist or read the instructions carefully.

Steps to configure a Wi-Fi connection with a router to a 3G USB Modem

Let's move on to our operation:

1. Step 1:: To start, install the necessary software from disks or component devices, otherwise nothing will work.
2. Step 2:: If there is a PIN verification installed on the SIM card, set it up. You can do this with a regular phone.
3. Step 3:: Connect the router to the power supply and install a 3G USB modem into the corresponding connector.
4. Step 4:: Now you need to log in to the router's control panel. If you don't know how to do this, please refer to the device's instructions. In most cases this panel is located at the following address: http://192.168.1.1.
5. Step 5:: You must explain the router, where to take the Internet for its distribution. Go to the tab «Connection» from the menu item «Internet«. On the right side of the window, check the box in front of the item «Enable modem connection«. Select the operator and fill in the required fields. Done!

Now you know how to set up a Wi-Fi connection with a router to a 3G USB modem. If all the steps are successful, you will have a working Internet connection. Remember that the speed of such a modem can be limited. Although recently there are practically no such problems. Now the tariffs differ in accessible incoming traffic. It is also advisable to keep in mind that such a connection will cost more than fiber optic or telephone network providers. But the choice is always left to the user. Nice to use!

Many have long used the capabilities of routers for network technologies. Router called a special network device that is a network node and can combine networks of different network technologies with each other. Using the router, you can connect the local network to the Internet and link the wired as well as wireless network using standard Ethernet and Wi-Fi, use the Wi-Fi router for USB modem.

The standard router is usually equipped with 4-8 ports, an antenna, to create wi-fi network specifications (B, G, A, N). More modern router models are manufactured with USB ports. The router with USB is more versatile and has excellent features.

Main functions

Using the USB port You can connect a USB flash drive to the router or a similar hard drive to the file server. You can use a router with a USB modem for 3G Internet distribution.

In addition, the USB port allows you to turn your router into a print server. If you connect the printer to the router, you can manage the print server from any computer. When using special firmware, the USB WiFi router can be configured in client mode. VPN.

Therefore, you can select the following main functions of the USB port:

1. Creating an FTP server and connecting to a device storage for storage devices (USB disk, flash drive, etc.),
2. connect to printer router (print server)
3. connecting to a USB modem router.

Setting up a Wi-Fi connection with a router as an FTP server

If you want to make a specific storage device available for your network (disk, flash drive, etc.), you need to connect the Yusb router and make special settings.

The memory can be connected not only to users of the local network, but also to the Internet. A memory device with such a connection is perceived from the network as a local FTP server or a network resource.

You can limit access to such a server by making appropriate settings on the router by authorizing login and password. Some users, with such settings, will only be able to view and download data, and some of them will have the corresponding rights to access, modify and pump information. To provide access to such an FTP server from the Internet, you need a real or dynamic IP address of the router.

Consider connecting the data drive to the example router D-Link Dir320. Need to connect k. USB port. Data storage and access the web interface of the router, typing in the browser http://192.168.1.1/

1. Step 1:: In the authorization window that opens, you must enter a username and password.

2. Step 2:: After that, in the left menu of the router, you need to select the USB application and the sub-clause is FTP server.
3. Step 3:: In the window that opens, you must enable the FTP server by selecting Yes.
4. Step 4:: Under Anonymous Users, you must select the access rights for anonymous users. To apply the settings, click Finalize and have the router reboot with the button Save and restart.

Copy shared files

If you plan to copy shared files, you must enable the Samba server. To do this, follow these steps:

1. Step 1:: In the left menu of the router, you must select a USB application, then the Samba sub-clause.
2. Step 2:: In the window that opens, you must go to Disk Partitions - Samba File Actions.
3. Step 3:: After that, in the field Host name, enter the name of the router (the one you want) in the field Name of the working group, the name of the workgroup is entered in the Workgroup Name field.

Basic Setup and Installation of TL-MR3020 Router

When you have entered all the settings, you must press Finalize and reboot the router. After that, you can connect to your ftp server with any ftp client or driver.

How to set up a Wi-Fi connection with a router to the printer

WiFi USB Router allows you to connect a printer to the router's USB port that is available from the local network. For such use, you need to install special programs and drivers suitable for your router model. In this case, the network functions of the printer are simulated and the printer controls the router. Therefore, the most important thing is that you can configure only the printing options that are used by the router driver.

Consider connecting the printer to the Asus RT-N56U Wi-Fi router under Windows 7. You can use the connectivity special program from the router manufacturer, or configure it manually.

1. Step 1:: To manually configure the printer connection to the router, you must enter the router menu by entering the browser http://192.168.1.1. In the authorization window, you must enter a username and password (administer and there).

2. Step 2:: After that, you need to open the start menu and select the control panel there.
3. Step 3:: Then go to the device and printers item and choose – add printer. Now we need to choose the printer type by clicking on the figure below.

4. Step 4:: After that, in the new window, you need to specify the printer port, as shown in the figure below and select from the drop-down list Standard TCP/IP Port.

5. Step 5:: The next window enters the value of the printer's IP address and it is the same as the router's IP address. You should also disable the option – Poll the printer. To continue with the setup, you must press the button below.

6. Step 6:: In a new window, configure the additional port information settings as shown in the figure below by selecting the device type, the usual type.

7. Step 7:: After that, you need to install the driver from the Internet or from the disk. When the driver is installed, the installation wizard will ask you to set up printer sharing.

Deny general access

Once the driver has been successfully installed, you can proceed to configure the port properties. To do this, follow these steps:

1. Step 1:: opens the submenu Device and printers from the Start menu.
2. Step 2:: Find your printer icon here and right-click it.
3. Step 3:: In the context menu select Properties and open the port element.
4. Step 4:: Here you must mark the created port and click on configure port.
5. Step 5:: In the TCP settings, specify the LPR protocol and enter the name. To complete the configuration, click Accept.

How to connect a modem through a USB router

To organize a Wi-Fi hotspot, you can connect a USB modem to the router. Consider connecting the modem to the D-Link Dir 320 / NRU 3G Wi-Fi router. To do this, plug the USB modem directly into the USB port of your router. The Internet connection will be automatic. With such a Wi-Fi connection, up to five users can operate simultaneously.

The functionality of the USB port is limited by the built-in software. Special firmware of the router extends this functionality. You can configure, for example, a network USB video camera or a USB IP phone. These features are constantly being updated. On the Internet, you can find the corresponding firmware and download it.

We will consider ways to connect the MTS modem to various devices: a computer or a tablet. And by connecting it to the router, you can run the Internet on several devices at once.

MTS 3G or 4G modems are a wireless device with a USB connector that provides high-speed Internet access.

To use the cellular communication network, the SIM card is usually inserted into it.

Connect to the router

If the router is equipped with a USB input, this allows you to work simultaneously on the Internet with several devices.

To access the Internet, you just need to have a Wi-Fi connection, and if the computer, for example, does not support this function, the network cable

You must follow several steps to access Internet resources:

1. Step 1:: If your device is compatible, connect the modem to the router. We need a router that supports USB 3G. You can find information about all providers and modems on the manufacturer's website.
2. Step 2:: Install the necessary settings for the router.

To do this, first register in the web application and enter the dial-in number. * 99 # and access point with its respective URL address depending on your internet provider.

Browse your router settings, if connection is not possible, you can reset your router.

Connect to computer

1. Step 1:: Connect the modem to the USB port on your computer.
2. Step 2:: After installing the driver on your computer or laptop screen, the MTS Connect Manager program will open automatically.
3. Step 3:: In the program shortcut you will see a computer on the desktop.

Connecting to the tablet

1. Step 1:: We use an OTG cable to connect to the tablet via a micro USB input. At the top of the screen, a 3G/4G connection symbol and a signal level will appear.
2. Step 2:: Adjust the settings.

If the tablet perceives the modem as a removable CD-ROM device, the Hyper Bus Terminal will help you connect them.

1. Step 3:: After selecting the program for your wireless device, you must enter two commands sequentially: ate1y À^u2diag.

You may also be interested in reading about: How to Use Homepod Without Wifi – Complete Guide

In addition to the usual phone call, it is possible to connect to the Internet if your tablet has a special slot for a SIM card, like in regular smartphones.

Often, mobile Internet operators produce locked modems that work exclusively on their network. Now it was possible to apply unlocking services to remove the lock. After certain manipulations, the SIM card of one of the mobile networks you can access the device.