How do I properly charge the Nintendo Switch OLED controller?

You just bought the Nintendo Switch OLED, but you don't know much about it and it's hard to charge it. This tutorial will help you understand everything Connect to charge your console After a while, you'll be ready to experiment with whatever you need to do. You can also learn how to put the stamps on your console.

Remember that you can buy the Nintendo Switch OLED in stores or online and that it is brand new. So you can enjoy all the advantages of the original Nintendo Switch OLED. Accessories and gadgets An original charger is required so that you can attach the controllers to your device when you start charging.

First, locate the charger in the box and then connect it to the console. You must connect the device's cable to the bottom of the console to slide the controllers of your Nintendo Switch. Connect the cables once placed.

To pair the controls, you will have to go to the Menu Change Click on the icon to identify the controllers. This will tell us if the controllers have been charged. Check that your controllers have been turned on so that the console can recognize and charge them.

Where can I find batteries for the Nintendo Switch OLED Controller and Nintendo Switch Lite?

It's easy to check the batteries on your Nintendo Switch consoles to see if they've charged. First, you need to plug the charger cable into your console. Next, plug in the cables. Once you've charged the battery, We make sure the drivers connect. This change will take you to the main menu. Here, next to the language options, you will find the language icon. Press the button to activate it.

In the controller configuration window, you can check if your controllers have been connected correctly. (If they are not reflected on the screen, it is likely that the charger has not been connected properly or the charger is falling off.)

We can see an illustration just below that shows that the controls are connected. power bar The outline turns black and is replaced by a green background. The brightness of this power bar indicates the amount of battery used by each machine.

Is it possible to leave the console charged at 100% and not have the controllers charged?

The battery may have reached its maximum capacity, so it is safe to leave the controllers charged for longer than necessary. But, as with any other electronic device that relies on rechargeable batteries Chargers must be removed Once the equipment is finished, a power outage can cause damage to the battery being monitored. It could discharge faster or not charge at all.

How and where you can charge your Nintendo Switch OLED controllers

There are two ways to clean the Nintendo Switch OLED plates. Both methods work the same way. You can clean the OLED plates on your Nintendo Switch using either of these two methods. Just plug in the Nintendo Switch cable and then turn on the controllers as explained above. This second method is a bit more complicated and requires the use of a magnifying glass. Additional accessory known as dockHowever, it may take longer to charge. The console is not accessible while the charging process is taking place.

You'll need to connect the cable to the accessories to charge the Nintendo Switch OLED controllers. Once you've connected the dock, you can place the console down with the cables removed.

Then you will have Click here to activate controls Next, you'll connect the controllers to your console, just as if you were playing a game with them. When everything is connected, you'll see a small green light on the console. This indicates that everything is working properly and that the console has started charging.

If this is your first time trying to repair your console, how long should you wait before connecting cables?

It is not recommended to leave the controllers charged for more than a few hours after charging. You can recharge the controller once it is full.

Not being able to be seen is a serious problem Reconnection and disconnection You cannot keep the controllers charged by charging them. It is recommended that you allow the controllers to charge for a while after removing them. This will prevent the batteries from overcharging and prematurely damaging them.

How long does it take to fully charge the Nintendo Switch OLED controllers?

Nintendo Switch OLED cables turn off after 3,5 hours Approximate duration: 3,5 hoursHowever, the charging current used to charge the Joy-Con controllers can affect how quickly they can be charged. If you notice that your controller is taking a while to charge, and it's not new, I suggest you go to your local retailer. They may be able to help you troubleshoot the problem. If you need technical support, Nintendo offers it through its various platforms.