How to Fix SrtTrail.Txt Error in Windows 10

Here we will show you how to fix the error SrtTrail.txt in Windows 10When this code is displayed on a Blue Screen of Death, it usually means that you need to opt for an advanced repair.

However, don't worry, we are here to help you solve your problem. This is a rather delicate procedure, since we will be working with commands.

Remember commands are orders and the computer will simply follow the codes you enter. That is, be very careful what you are going to write if you do not want to cause damage or fail in the process.

How to fix srttrail.txt error in Windows 10?

To fix the error SrtTrail.txt on Windows 10 you must carry out the following procedure with caution:

1. Open the symbol of the system from Advanced Troubleshooting to fix the error.
2. Restore your system from Advanced troubleshooting to restore your PC to a previous date.
3. Disable automatic startup repair from the command prompt.
4. Repair Windows registry files.
5. Remove corrupt error files.
6. Check the partition values ​​on the device.
7. Change the BIOS settings.
8. Change the settings via the safe mode with the Web.
9. Unplug the devices USB.
10. Remove the laptop battery.
11. Check and reconnect the hard drive.
12. Unplug and reconnect the RAM.
13. Copy files and reboot your system.
14. Copy files and reinstall Windows.

Maybe you may be interested: Clock_Watchdog_Timeout Error: 8 Possible Solutions to the Blue Screen

1. Open Command Prompt via “Advanced Troubleshooting”

From the troubleshooting command prompt, you can change all the Windows settings. In this step, we will explain all the commands you need to take to fix your srttrail.txt.

Step 1: you might be getting the Automatic Repair window (your PC did not start correctly). Otherwise, press and hold the key Shift  on your keyboard and press the button that is used for power on. This way you will get the option to reboot. Press reboot for an advanced troubleshooting screen.

Step 2: For the auto repair screen: press “Advanced".

Step 3: Now you can choose an option. Click on troubleshoot.

Step 4: click Advanced.

Step 5: in the Advanced Options page, Select Symbol of the system.

Step 6: Select your user account and enter the password.

• Step 7: don't forget to click Numerical lock because most of the time, it turns off itself.
• Step 8: It's time to use the command to check the disk. Type the command Chkdsk /f [space key] /r [space key] C: and press the key Enter to run it.
• Step 9: write C: and press Log in.
• Step 10: place the command cd [space key] c:\windows\system32\config and press Log in.
• Step 11: type the command: md [space key] backup and press Log in.
• Step 12: use the command copy [space key] *.* [space key] backup and press Log in.
• Step 13: type the command: md [space key] backup1 and press Enter.
• Step 14:: place the command copy [space key] *.* [space key] backup1 and press Log in.
• Step 15: Now you must write the command cd [space key] regback  and press Log in.
• Step 16: command type: dir and press Log in.
• Step 17: write copy [space key] *.* [space key] ..  and press Log in. (Your copy *. * ..)
• Step 18: type the command:  bootrec [space key] /fixmbr and press Log in.
• Step 19: places  bootrec [space key] /fixboot  and press the option Log in.
• Step 20: write bcdedit [space key] /export [space key] c:\bcdbackup  and press Log in. (Is  bcdedit /export c:\bcdbackup).
• Step 21:: place the command attrib [space key] c:\boot\bcd [space key] -h [space key] -r [space key] -s  and press Log in. (It is the attribute c:\boot\bcd -h -r -s)
• Step 22: Now it's time to place the command ren [space key] c:\boot\bcd [space key] bcd.old  and press Log insystem. ( ren c:\boot\bcd bcd.old )
• Step 23: Then we use the command bootrec [space key] /rebuildbcd  And we pressed Enter (is  bootrec/rebuildbcd).
• Step 24: After typing the command, press “y” and the key Intro.
• Step 25:: exit the command to exit the command prompt. Then press continue to start your PC.

2. Restore the system by entering Advanced Options

A restore point helps you restore your PC to an earlier date when it was working fine. It can be created by the software you installed on your PC or manually.

How do you deal with error? srttrail.txt, you may have the window Auto repair.

If not, you can restart your computer by holding down the power button for 10 seconds and you will get it. When you see it, follow these steps:

Step 1:: pulsa Advanced.

Step 2:: press Problem solving.

Step 3: Now press again Advanced.

Step 4: select option System Restore.

Step 5: You will be prompted to select your account. Click on your account and enter your account password.

Step 6: shows you the restore window.

Step 7: click Next, and if you are getting a sample of more restore points, check the box.

Step 8:: select your restore point.

Step 9: click the button Search program affected.

Step 10: then click Close and press Next.

It may take some time, but don't worry, in most cases this fixes the problem.

3. Disable Automatic Startup Repair from Command Prompt

Startup Repair is a Windows recovery tool. It can fix some of the system problems that cause Windows to crash.

This tool scans your computer and fixes the file that is causing the problem so that your PC can function properly. Here is the procedure to follow:

Step 1: click the button Advanced.

Step 2: click Problem solving.

Step 3: Now click again on Advanced.

Step 4: press the Symbol of the system to open it.

Step 5: Select your user account and enter the password.

Step 6: don't forget to click Numerical lock again because most of the time the num lock is turned off.

Step 7: use the command  bcdedit /set {default} recoveryenabled No and press Enter.

• The above command is: bcdedit [space key] /set [space key] {default} [space key] recoveryenabled [space key] No. Then press Enter. This will take some time, once the process is complete, restart your PC.

4. Repair Windows registry files

Windows Registry files are an essential part of the system. It is a database of windows that contains many things like settings, values, and other customization options.

If you are thinking of making changes to the Windows database, you should be careful. However, since we are advising you on commands, you don't have to worry so much. Follow the steps below:

Step 1: Click the button Advanced.

Step 2: click Problem solving.

Step 3: Now click again on Advanced.

Step 4: click Symbol of the system to open it.

Step 5: Select your user account and enter the password.

Step 6: Don't forget to click Num Lock again because most of the time it turns off.

Step 7: Command Type: copy c:windowssystem32configRegBack * c:windowssystem32config  and press Log in.

• The above command is copy [space key] c:\windows\system32\configRegBack * [space key] c:\windows\system32\config. press Log in.
• The above command will take some time and once done, restart your PC.

5. Remove corrupted error files

The corrupt files are the main problem of Windows. It could happen because the files are not saved properly on your hard drive or on the storage drive. storage.

El malware is another problem that could infect and damage your Windows files. Now let's fix the corrupted files on your PC:

Step 1: click the button Advanced.

Step 2: press Troubleshooting.

Step 3: Now click again on Advanced.

Step 4: click Symbol of the system to open it.

• Step 5: Select your user account and enter the password. Click on Numerical lock again in case it has been disabled.
• Step 6: write the command C: [Enter Key] cd [keyspace] WindowsSystem32LogFilesSrt [Enter Key] SrtTrail.txt and press Enter.
• Step 7: After typing the above command, you get a result similar to: The critical archive of Boot c: windowssystem32driversvsock.sys is corrupted. It means that the file driversvsock.sys became corrupted.
• Step 8: Now you need to enter the command given below: cd [space key] c:\windows\system32\drivers [enter key] del [space key] vsock.sys and press the enter key.
• Step 9: Now restart your computer by typing the command shutdown [space key] / ry  remove/uninstall files from VMware.

6. Check the device partition values

Sometimes we get SrtTrail.txt error as a result of incorrect value on the device. It occurs due to malware or corrupted disk space. Follow the given steps to fix the error:

Step 1: click the button Advanced.

Step 2: pulsa Troubleshooting.

Step 3: press again Advanced.

Step 4: pulsa Symbol of the system to open it.

• Step 5: Select your user account and enter the password.
• Step 6: press the num lock key.
• Step 7: write the command bcdedit [space key] /set [space key] {default} [space key] device [space key] partition=c: and press Log in.
• Step 8: place a second command: bcdedit [space key] /set [space key] {default} [space key] osdevice [space key] partition=c:
• Step 9: press Log in.
• Step 10: Now write  shutdown [space key] / r  to restart your PC.

You may want to know: Critical Process Dies – How to Fix This Error in Windows 10?

7. Change BIOS settings

BIOS is a firmware which is used to verify your entry and exit, which includes all the components of hardware connected to the motherboard. In the BIOS, there are some setting changes and you can fix your problem this way:

A. Check the boot options

To do this, do the following:

• Step 1: When you press the power button to start your computer, press the key continuously (without holding it down) as if you were tapping the keys.
• Step 2: press: F1, F2, F3, F8, F10, F11, Tab, Del and Esc keyIt all depends on the brand of computer you have, however, Esc always works.
• Step 3: Once you have the BIOS screen, look for Boat. Option you will find in System Configuration if you have an HP laptop.
• Step 4: after locating the boot option, select your hard drive.
• Step 5: In some cases, you need to move the hard drive as primary so that it can boot Windows.
• Step 6: After making changes, save the settings and exit the BIOS.

b) Change the XD, NX or XN settings

The XD, NX, or XN options stop the execution of the specific type of codes.

• The XD are the options developed by Intel.
• The NX are the options developed by AMD.
• The XN is the ARM processor option known as the RISC-based CPU family.

Here you must follow the procedure below:

• Step 1: do the same as mentioned in the previous point to open the BIOS.
• Step 2: look for the Security options.
• Step 3: locate the option XD, NX or XN and enable it.
• Step 4: After making changes, save the settings and restart your PC.

8. Repair drivers via Safe Mode with Networking

Drivers are an essential part of the PC. It helps the computer to communicate between hardware and software. If your driver got corrupted, it could be the cause of the srttrail.txt error.

To repair the drivers, you need to access Safe Mode with Networking. Follow the steps below to repair the drives:

Step 1: Click the button Advanced.

Step 2: click Troubleshooting.

Step 3: click Advanced.

Step 4: Now click on Startup configuration.

Step 5: In the startup settings, you will have the option to enable safe mode.

Step 6: click Reset button.

Step 7: Once you have pressed the reset button, you will have to wait some time.

Step 8: After the reboot, the screen to select your option will appear: Safe mode with networking.

Step 9: Once you get the screen, you will be prompted to use the number keys 1 through 9. You can also use the keys F1 to F9.

Step 10: press the number 5 or F5 on your keyboard.

Step 11: starts loading the files to start your computer in safe mode with networking.

Step 12: you will be shown the same screen to enter the login password. Enter your account password.

Step 13: Once you see the Safe Mode with Network screen, you will see Safe Mode in all four corners along with the Wi-Fi network.

Step 14: Press and hold the keys Windows + R and a search pop-up window will appear.

Step 15: type the command in the run window devmgmt.msc to open the Device administrator.

Step 16: In device manager, you need to check the drivers one by one to see if any drive is causing a problem or not.

Step 17: Right click on the driver. Hz click on the We take care of your rental property in Valencia. .

Step 18: you will get five tabs. Click on the tab Controller and update the drivers.

9. Unplug USB devices

As we know, when we connect any USB device, our computer needs to have the drives to run that device properly.

If any of the drives are damaged in relation to the device connected to the PC, it is suggested to disconnect all the devices and restart the computer.

10. Disconnect the battery from the laptop

Removing the battery from your laptop helps you reset your BIOS settings if you do not have the CMOS battery in your PC.

It is better if you remove the battery for 30 minutes and then connect the charger instead of a battery, to check if it works.

11. Unplug and reconnect the hard drive

It's fundamental check hard drive, as it plays an important role in loading the windows. Most of the users' problems are solved after disconnecting and connecting the hard drive.

It seems difficult since you are not an expert in opening your laptop or desktop to disconnect and reconnect the hard drive. Still, there are several videos on YouTube that explain the hardware components related to your laptop or desktop model.

If you find the video, that's fine. If not, We can tell you the steps you would like to know depending on your laptop or desktop model. If you want the steps, please comment us at the end with your computer model number.

12. Unplug and reconnect the RAM

As we all know, the RAM RAM plays an essential role in computers. Higher RAM is better for data processing. It is essential to check, because sometimes the RAM connected to your motherboard goes missing and creates an error in the computer. Here are the important points that you need to keep in mind:

• Step 1: place your laptop or desktop computer on the table.
• Step 2: remove the battery before opening the laptop case.
• Step 3: Keep the screw in a safer place when opening the computer case or desktop cabinet. Remember all the connection points as well. Don't use too much force to attach or remove anything from the motherboard.
• Step 4: It is best to have the pen and paper with you to note down the fixing points and reconnect them correctly.

13. Copy files and reboot your system

When srttrail.txt error occurs, most of the users want to reset their Windows PC. This is a bit risky, but we can copy all the files from D drive to a Pen drive.

Copy the files

Follow the steps below:

Step 1: Click the button Advanced.

Step 2: click Problem solving.

Step 3: Now click again on Advanced.

Step 4: click Symbol of the system to open it.

Step 5: Select your user account and enter the password. Press the num lock key.

Step 6: write the command xcopy [space key] /S [space key] D:\Songs [space key] E:\Songs and press Enter.

• The above command is xcopy /SD:\Songs E:\Songs.
• You can simply type a command: xcopy [space key] /S [space key] D:\ [space key] E:\ and press Log in. The command is: xcopy /SD:\E:\.

Restart your pc

Follow the procedure below:

Step 1: click the button Advanced.

Step 2: click Problem solving.

Step 3: pulsa Reset this PC.

Step 4: Here you can select keep my files o remove all.

Step 5: Select your account and enter your password. Press the num lock key.

14. Copy the files and reinstall Windows

In this step, you need to reinstall Windows on your PC after copying all the files to the Pen drive. If you are thinking of reinstalling Windows, you must have a Bootable pen drive with Windows 10.

Connect that controller to your laptop or desktop and enter the BIOS mode. We have mentioned the keys to enter the BIOS mode in the step 7However, you can try the key ESC on your keyboard to enter your BIOS setup.

You need to learn: How to fix error 0xc000007b

We hope you have been able to fix the SrtTrail.txt error on Windows 10 on your PC. If you have any questions or suggestions, feel free to comment in the space provided. We will be happy to provide you with the material you need on our website.